世界有色金属Issue(2)：205-207,3.
火试金法测定冶炼渣样中银量补正的研究
Study on the Correction of Silver Content in Smelting Slag Samples by Fire Assay
蒋晓梅 1刘春江 2尹志涛 3王绍娟 3丁志超2
作者信息
- 1. 中恒诺贵金属检测检验有限公司,山东 烟台 265400
- 2. 山东招金金银精炼有限公司,山东 烟台 265400
- 3. 中恒诺贵金属检测检验有限公司,山东 烟台 265400||山东招金金银精炼有限公司,山东 烟台 265400
- 折叠
摘要
Abstract
During the silver smelting process,silver-containing waste residue is produced.Accurately determining its silver content not only helps optimize the production process but also avoids disputes caused by data deviations.The partial loss of silver during the blowing process of the gold ash in the fire test can cause result deviations and affect the accuracy of the test data.In this experiment under the same environmental conditions,through the spiked experiment,the recovery rate of silver obtained with different silver contents was detected by the fire assay method,and the silver correction coefficient was calculated.When detecting the silver content in the smelting slag,the silver can be corrected by referring to different silver contents.关键词
火试金/银量/补正/渣样Key words
fire assay/silver content/supplement and correct/slag sample分类
矿业与冶金引用本文复制引用
蒋晓梅,刘春江,尹志涛,王绍娟,丁志超..火试金法测定冶炼渣样中银量补正的研究[J].世界有色金属,2026,(2):205-207,3.
