世界有色金属Issue(3)：7-9,3.
冷轧变形量对钛合金再结晶程度的影响
Effect of Cold Rolling Deformation on the Recrystallization Degree of Titanium Alloy
沈飞飞 1张金霞 1梁必成 1刘涛 1俞翔1
作者信息
- 1. 浙江申吉钛业股份有限公司,浙江 湖州 313306
- 折叠
摘要
Abstract
The microstructure and grain size of TC4 titanium alloy sheets with different cold rolling reductions were investigated using optical microscopy,scanning electron microscopy,and EBSD.The relationship between cold rolling reduction and recrystallization degree was discussed.The results indicate that as the cold rolling reduction increases,the average grain size decreases,and the proportion of high-angle grain boundaries also rises,suggesting a more complete recrystallization.The paper demonstrates that increasing the cold rolling reduction not only more effectively refines the grain size but also enhances the degree of recrystallization completion.关键词
TC4板材/冷轧变形量/微观结构/EBSD/晶粒尺寸/再结晶/大角晶界Key words
TC4 sheet/cold rolling deformation/microstructure/EBSD/grain size/recrystallization/high-angle grain boundaries分类
矿业与冶金引用本文复制引用
沈飞飞,张金霞,梁必成,刘涛,俞翔..冷轧变形量对钛合金再结晶程度的影响[J].世界有色金属,2026,(3):7-9,3.
