电焊机2026，Vol.56Issue(4)：81-86,6.DOI:10.7512/j.issn.1001-2303.2026.04.10
增材制造核燃料部件入堆应用及监管路线研究
Research on the Application and Regulatory Route of Additive Manufac-turing for Nuclear Fuel Components in Nuclear Reactors
付浩 1张博 2朱发文 3任全耀 3蒲曾坪 3焦拥军3
作者信息
- 1. 生态环境部核与辐射安全中心,北京 100082
- 2. 中国核动力研究设计院,四川 成都 610213||核能增材制造四川省重点实验室,四川 成都 610213
- 3. 中国核动力研究设计院,四川 成都 610213
- 折叠
摘要
Abstract
Additive manufacturing technology,with its advantages in fabricating complex structures and enhancing compo-nent performance,presents significant application prospects in the development of nuclear fuel components.However,China's current nuclear regulatory framework lacks specific technical requirements for additive manufacturing processes,and corresponding nuclear safety supervision practices are yet to be established,which hinders the engineering application of this technology in the nuclear field.This paper systematically investigates the safety evaluation system and in-reactor regulatory pathway for additively manufactured components established by the U.S.Nuclear Regulatory Commission(NRC),with particular emphasis on analyzing the material performance evaluation methodology and licensing process for Westinghouse's additively manufactured thimble plugging devices.Based on this analysis and considering China's nuclear safety regulatory framework,this study proposes an evaluation system and regulatory implementation pathway for in-reactor application of additively manufactured nuclear fuel components,encompassing out-of-pile and in-pile material performance verification as well as component functional qualification.The results can provide technical support and regulatory refer-ences for promoting the application of additive manufacturing technology in domestic nuclear fuel development and com-mercial reactor irradiation testing.关键词
增材制造/核燃料部件/入堆应用/监管路径/阻流塞组件Key words
additive manufacturing/nuclear fuel components/in-reactor application/regulatory pathway/blocking plug com-ponent分类
能源科技引用本文复制引用
付浩,张博,朱发文,任全耀,蒲曾坪,焦拥军..增材制造核燃料部件入堆应用及监管路线研究[J].电焊机,2026,56(4):81-86,6.
