机械制造与自动化2026，Vol.55Issue(2)：50-55,6.DOI:10.19344/j.cnki.issn1671-5276.2026.02.010
针对柱上变压器的无人机绝缘喷涂技术研究
Drone Insulation Spraying for Pole-mounted Transformers
摘要
Abstract
Insulating coating application to pole-mounted transformer tap changers prone to metal exposure faults can enhance the reliability of power supply,and the live insulating spraying system based on drones ensures personnel safety and improves operational efficiency.An insulation spraying scheme for 10 kV pole-mounted transformers was designed on SolidWorks and ANSYS simulation platforms,and spraying parameters were set.The nozzle spraying pressure range was set between 0.2-0.4 MPa,with spraying time in 1 second,and in application of point spraying to optimize the spraying effect.The nozzle diffusion angle,spraying angle,and distance were set as variables for simulation.The research results show that the best spraying coverage is achieved when the nozzle diffusion angle is 30°,the spraying angle is 15°,and the nozzle distance from the equipment is 0.65 m.The spraying scheme was validated through on-site spraying operations,confirming that the critical parts of the pole-mounted transformer received effective insulation protection after spraying,which enhances the stability and safety of the power supply.关键词
SolidWorks/ANSYS/无人机喷涂/10 kV柱上设备/柱上变压器绝缘Key words
SolidWorks/ANSYS/drone spraying/10 kV pole-mounted equipment/pole-mounted transformer insulation分类
信息技术与安全科学引用本文复制引用
韩俊康,郝思鹏,何嘉铭,李思源,荆启文..针对柱上变压器的无人机绝缘喷涂技术研究[J].机械制造与自动化,2026,55(2):50-55,6.基金项目
江苏省科技成果转化专项资金项目(BA2022105) （BA2022105）
