| 注册
首页|期刊导航|农业工程学报|不同来源生物炭催化重整制氢性能

不同来源生物炭催化重整制氢性能

展鹏程 刘欢 沈秀丽 孟海波 丛宏斌 邢浩瀚 陆美谷 湛杨

农业工程学报2026,Vol.42Issue(5):320-329,10.
✕
农业工程学报2026,Vol.42Issue(5):320-329,10.DOI:10.11975/j.issn.1002-6819.202507126

不同来源生物炭催化重整制氢性能

Performance of biochar from different sources in catalytic reforming for hydrogen production

展鹏程 1刘欢 2沈秀丽 2孟海波 3丛宏斌 2邢浩瀚 2陆美谷 2湛杨1

作者信息

  • 1. 农业农村部规划设计研究院,农业农村部农业废弃物能源化利用重点试验室,北京 100125||青岛农业大学机电工程学院,青岛 266109
  • 2. 农业农村部规划设计研究院,农业农村部农业废弃物能源化利用重点试验室,北京 100125
  • 3. 农业农村部规划设计研究院,农业农村部农业废弃物能源化利用重点试验室,北京 100125||农业农村部成都沼气科学研究所,成都 610041
  • 折叠

摘要

Abstract

This study aims to investigate the catalytic performance of biochar from the various feedstocks in hydrogen production via biomass pyrolysis and reforming.Biochar catalysts were prepared from four feedstocks,such as corn stover,bamboo,pine wood,and chitin.A two-stage fixed-bed reactor was also used for the catalytic reforming of the rice husk.A systematic evaluation was made to explore the impacts of the biochar on the yields of the gas-liquid-solid products,gas composition,and H2 selectivity.There was a structure-activity relationship between the physicochemical properties(specific surface area,pore structure,functional groups,and elemental composition)and catalytic performance.Biochar catalysts were prepared via pyrolysis at 600 ℃ under N2 atmosphere.In catalytic experiments,the rice husk was pyrolyzed in the first stage at 550 ℃,then the volatile products were mixed with the steam,and finally introduced into the second stage for steam reforming at 800 ℃ on the biochar catalyst bed.Gas components(H2,CO,CH4,CO2,C2H4,and C2H6)were selected to calculate the product yields and H2 selectivity using gas chromatography(GC).The biochar was characterized by scanning electron microscopy(SEM),Brunauer-Emmett-Teller(BET)surface area analysis,Fourier transform infrared spectroscopy(FTIR),and X-ray photoelectron spectroscopy(XPS).The parameters were determined after comparison,including the microstructure,specific surface area,pore structure,surface functional groups,and elemental chemical states.The results showed that all four biochar catalysts effectively promoted tar cracking and gas yield,but their catalytic performance varied significantly.In the blank control test without catalysts,the yields of gas,liquid tar,and solid biochar from the rice husk pyrolysis were 198.97,488.31,and 312.72 mg/g,respectively.In the biochar-added groups,no significant difference was observed in the solid product yields.But the liquid yields were reduced for the high gas yields,compared with the blank control.The liquid yields for the corn stover char,bamboo char,pine wood char,and chitin char were 321.19,310.02,278.13,and 282.54 mg/g,respectively—all significantly lower than the blank control.The gas yields were 371.66,379.98,412.75,and 408.46 mg/g,respectively,much higher than the blank control.In terms of H2 yield and selectivity,all catalysts were significantly improved,compared with the blank control(1.41 mmol/g and 17.43%,respectively).Chitin biochar also exhibited the best catalytic performance,with the H2 yield and selectivity of 12.59 mmol/g and 53.33%,followed by the pine wood biochar(10.74 mmol/g and 46.83%).Maize stover char and bamboo char showed relatively lower activity,with the H2 yields of 8.41 and 8.38 mmol/g,while the selectivity of 42.69%and 41.32%,respectively.The superior catalytic performance of chitin char was attributed to the large specific surface area(86.848 m2/g),hierarchical pore structure to facilitate the mass transfer,and high nitrogen content(6.08%).The"nitrogen self-doping"effect also generated the abundant nitrogen-containing active functional groups(pyridinic N and pyrrolic N),thus promoting deep tar cracking and reforming reactions.The high activity of pine wood biochar was associated with the well-developed mesoporous network,large specific surface area,and rich surface oxygen-containing functional groups.Although the corn stover biochar contained alkali(earth)metals and abundant surface oxygen-containing functional groups,the high ash content reduced the catalytic activity.Bamboo char shared the low specific surface area,possibly due to a dense silicon layer on the surface that passivated active sites and limited catalytic activity.The type of biochar feedstock was selected to determine the physicochemical properties and catalytic performance in the reforming of hydrogen production.The specific surface area,pore structure,and active sites of biochar were the key enhancing factors on the hydrogen production efficiency.The screening of biochar feedstocks can be used to improve the catalyst performance,targeted design,and regulation.The findings can provide the theoretical and technical references to develop highly efficient,low-cost catalysts for high-value biomass utilization.

关键词

生物炭催化剂/甲壳素/催化重整/制氢

Key words

biochar catalyst/chitin/catalytic reforming/hydrogen production

分类

能源科技

引用本文复制引用

展鹏程,刘欢,沈秀丽,孟海波,丛宏斌,邢浩瀚,陆美谷,湛杨..不同来源生物炭催化重整制氢性能[J].农业工程学报,2026,42(5):320-329,10.

基金项目

农业农村部规划设计研究院自主研发项目(SH202405) (SH202405)

国家现代农业产业技术体系小麦体系秸秆综合利用岗位科学家项目(CARS-03-41) (CARS-03-41)

农业农村部规划设计研究院农规英才项目(QNYC-2021-03) (QNYC-2021-03)

农业工程学报

1002-6819

访问量0
|
下载量0
段落导航相关论文