农业装备与车辆工程2026，Vol.64Issue(3)：105-109,5.DOI:10.3969/j.issn.1673-3142.2026.03.017
基于有限元理论的折叠式防突钻机设计及仿真
Design and simulation on foldable drilling rig based on finite element analysis
王登科 1李培磊 1王超 2鹿腾 1李宵霄 1徐诚 1李东民 3李希峰3
作者信息
- 1. 山东华坤地质工程有限公司,山东 泰安 271000
- 2. 鄂托克前旗长城五号矿业有限公司,内蒙古 鄂尔多斯 016200
- 3. 山东科技大学 智能装备学院,山东 泰安 271019
- 折叠
摘要
Abstract
To address the issues of the large overall structural dimensions,insufficient operational flexibility,and low work efficiency in existing outburst prevention drill rigs,a foldable outburst prevention drill rig was designed based on an analysis of its structure and working principle.Through structural optimization of the feeding mechanism and the slewing mechanism,a slewing device was added at the base of the feeding mechanism to enable the folding function of the drill rig.Static and dynamic analyses of the complete machine were conducted using ANSYS Workbench.The results showed that the strength and vibration characteristics of the key components met the design requirements,the overall structural dimensions of the rig were significantly reduced,and both the flexibility of drilling operations and work efficiency were effectively improved.关键词
防突钻机/有限元分析/折叠式/动力学仿真Key words
drilling rig for gas outburst/finite element analysis/foldable/dynamics simulation分类
矿业与冶金引用本文复制引用
王登科,李培磊,王超,鹿腾,李宵霄,徐诚,李东民,李希峰..基于有限元理论的折叠式防突钻机设计及仿真[J].农业装备与车辆工程,2026,64(3):105-109,5.
