天津建设科技2026，Vol.36Issue(2)：58-61,80,5.DOI:10.3969/j.issn.1008-3197.2026.02.012
成型方式对水性环氧乳化沥青混合料细观空隙特征的影响
Impact of Forming Methods on the Mesoscopic Void Characteristics of Waterborne Epoxy Emulsified Asphalt Mixtures
李胜凯1
作者信息
- 1. 沧州市市政工程股份有限公司,河北 沧州 050051
- 折叠
摘要
Abstract
In order to investigate the mico-scale void structure of water-based epoxy emulsified asphalt muxtures under different molding methods,this paper utilized X-ray CT scanning and digital image processing techniques by comparing and analyzing the void ratio,void distribution,and morphological characteristics of the mixtures under three molding processes(vibration,rotational compaction,and Marshall compaction),the mechanism of the molding method on the formation of the internal structure was revealed.The results show that vibration molding and rotational compaction can effectively improve the uniformity of the void distribution within the mixture and significantly reduce the proportion of large-sized voids,thereby constructing a more stable frame-work structure.Compared to the traditional Marshall compaction,these two molding methods demonstrate sig-nificant advantages in enhancing the performance of the mixture and can be selected as the preferred molding methods in the mix proportion design of water-based epoxy emulsified asphalt mixtures.关键词
水性环氧乳化沥青/细观空隙特征/成型方式/微观成像技术Key words
waterborne epoxy emulsified asphalt/microscopic void characteristics/molding method/microscopic imag-ing technology分类
交通工程引用本文复制引用
李胜凯..成型方式对水性环氧乳化沥青混合料细观空隙特征的影响[J].天津建设科技,2026,36(2):58-61,80,5.
