重庆理工大学学报2026，Vol.40Issue(7)：64-74,11.DOI:10.3969/j.issn.1674-8425(z).2026.04.008
一种防爆金属车轮编织胎体的振动模态分析
Vibration modal analysis of a metal wheel woven tire
赵正龙 1张立恒 1张文凯 1左华山 1赵秀栋1
作者信息
- 1. 青州高新技术研究所,山东 青州 262500
- 折叠
摘要
Abstract
This paper develops a non-pneumatic all-metal mesh tire to eliminate the risk of blowout caused by puncture or shrapnel penetration.The tire is applicable to planetary rovers and military and civilian vehicles.As the metal helical springs in woven tire are highly intertwined with each other and have numerous contact points,a finite element model is built through ANSA,ABAQUS software and the secondary development technique.Simulation analysis of free and constraint stator are performed.Based on the theory of flexible beam,a tread-side wall coupled dynamic model is built,considering the in-plane bending of tire surface,spring preload and sectional stiffness of the sidewall.A tire prototype with the same dimensions as a 235/70 R16 pneumatic tire is manufactured.Modal experiments are conducted,and the model parameters are identified by improved particle swarm optimization algorithm(IPSO).Results show:(1)within the frequency range of 0-300 Hz,both simulation and theoretical models accurately capture the vibration modes and transmission characteristics of the woven tire,and the analysis range can be extended to 500 Hz;(2)fixing the wheel rim reduces the natural frequencies of low-order modes,while exerting negligible impacts on high-order modes.关键词
金属轮胎/有限元仿真/动力学建模/模态试验/参数辨识Key words
metal tire/finite element simulation/dynamic modeling/modal tests/parameter identifica-tion分类
交通工程引用本文复制引用
赵正龙,张立恒,张文凯,左华山,赵秀栋..一种防爆金属车轮编织胎体的振动模态分析[J].重庆理工大学学报,2026,40(7):64-74,11.
