| 注册
首页|期刊导航|陶瓷学报|白光LED用Eu3+激活红色荧光粉的激发光谱调控策略与研究进展

白光LED用Eu3+激活红色荧光粉的激发光谱调控策略与研究进展

王三海 徐彦乔 胡庆 徐志芳 王连军 江莞

陶瓷学报2026,Vol.47Issue(2):267-281,15.
陶瓷学报2026,Vol.47Issue(2):267-281,15.DOI:10.13957/j.cnki.tcxb.2026.02.004

白光LED用Eu3+激活红色荧光粉的激发光谱调控策略与研究进展

Strategies and Progress in Excitation Spectrum Modulation of Eu3+-activated Red Phosphors for White Light-emitting Diodes

王三海 1徐彦乔 2胡庆 1徐志芳 3王连军 4江莞4

作者信息

  • 1. 景德镇陶瓷大学 材料科学与工程学院,江西 景德镇 333403
  • 2. 景德镇陶瓷大学 国家日用及建筑陶瓷工程技术研究中心,江西 景德镇 333403
  • 3. 中国轻工业陶瓷研究所,江西 景德镇 333001
  • 4. 景德镇陶瓷大学 国家日用及建筑陶瓷工程技术研究中心,江西 景德镇 333403||东华大学 材料科学与工程学院,上海 201620
  • 折叠

摘要

Abstract

[Significance]White light-emitting diodes(WLEDs)have emerged as the dominant next-generation solid-state lighting technology,valued for their energy efficiency,long lifespan and environmental friendliness.A critical factor determining WLED performance,particularly color rendering index(CRI)and correlated color temperature(CCT),is optical properties of the down-conversion phosphors used in conjunction with LED chips.While blue-pumped YAG:Ce3+-based WLEDs are commercially prevalent,they suffer from a deficiency in red spectral components,resulting in high CCT and low CRI,which limits their suitability for high-quality illumination.An alternative and superior approach employs near-ultraviolet(NUV,380-420 nm)LED chips combined with red,green and blue(RGB)tri-phosphors to achieve full-spectrum high-CRI(>90)white light.However,the development of efficient NUV-excitable red phosphors remains a major bottleneck.Eu³⁺-activated red phosphors are highly attractive,due to their excellent color purity(dominant 5D0→7F2 emission at~615 nm),chemical/thermal stability and low cost.Nevertheless,their practical application is severely hindered by intrinsically weak and narrow-line f-f excitation peaks at about 395 nm,which exhibit poor spectral overlap with commercial NUV LED chips,leading to low absorption efficiency.Overcoming this fundamental limitation is therefore of paramount significance for advancing high-performance full-spectrum WLED technologies. [Progress]To address the weak NUV absorption of Eu3+,researchers have developed four primary strategies,each with distinct mechanisms and varying degrees of success.Firstly,high-concentration doping is used to increase the number of Eu³⁺absorption sites.By engineering crystal structures with large cationic distances or insulating polyhedral networks,non-radiative concentration quenching can be mitigated,enabling doping concentrations up to 100%and significantly enhanced absorption.However,the improvement in absorption efficiency remains modest(typically<40%)and the intrinsic line-like nature of the absorption is unchanged.Secondly,sensitization via co-doping introduces ions like Sm3+,Tb3+or Bi3+,which possess stronger or broader absorption bands.Sm3+and Tb3+can absorb light at specific NUV wavelengths and transfer energy to Eu³⁺,but their own narrow absorption limits the overall gain.In contrast,Bi3+,with its intense,spin-allowed 1S0→3P1 broadband transition in the NUV region,has shown greater promise.Notably,systems like LiKBi2(MoO4)4:Eu3+have achieved an ultrabroad excitation band(200-400 nm)and a high external quantum efficiency(EQE)of 84.7%,primarily through Bi3+→Mo6+metal-metal charge transfer(MMCT).Thirdly,macroscopic structural engineering focuses on enhancing light-matter interaction by fabricating phosphors as dense ceramics,transparent ceramics or phosphor-in-glass(PiG)composites.These architectures extend the effective optical path length of the incident NUV light,thereby increasing the probability of absorption.Transparent ceramics,in particular,offer excellent thermal management and high optical quality,but require complex high-cost fabrication processes.Finally,host matrix engineering seeks to create intrinsic broadband NUV absorption by rationally designing the host to position its charge transfer band(CTB)or MMCT band within the NUV window.Molybdate and tungstate hosts containing[MoO6]octahedra have been extensively explored for this purpose,as their CTB can be tuned into the NUV range,providing a direct and efficient excitation channel for Eu3+. [Conclusions and prospects]In summary,while significant advances have been made in enhancing the NUV excitation of Eu3+-activated red phosphors,no single strategy yet delivers an ideal combination of strong broadband absorption,high quantum efficiency,stability and cost-effective scalability.Future efforts should prioritize synergistic approaches:refining host engineering through predictive crystal-chemical design to tune charge transfer bands into the 380-410 nm range,optimizing Bi3+co-doping by tailoring its local coordination to maximize energy transfer and developing scalable fabrication methods for transparent or glass-integrated phosphor architectures.Achieving these goals will enable the practical deployment of Eu3+-based red phosphors in high-CRI full-spectrum WLEDs for human-centric lighting applications.

关键词

白光 LED/Eu3+/红色荧光粉/激发峰/电荷迁移带/能量传递

Key words

white LED/Eu3+/red phosphor/excitation peak/charge transfer band/energy transfer

分类

化学化工

引用本文复制引用

王三海,徐彦乔,胡庆,徐志芳,王连军,江莞..白光LED用Eu3+激活红色荧光粉的激发光谱调控策略与研究进展[J].陶瓷学报,2026,47(2):267-281,15.

基金项目

国家重点研发项目(2021YFB3500504) (2021YFB3500504)

江西省自然科学基金(20224BAB214024,20232BAB204012,20232BAB204015). (20224BAB214024,20232BAB204012,20232BAB204015)

陶瓷学报

2095-784X

访问量1
|
下载量0
段落导航相关论文