材料科学与工程学报2026,Vol.44Issue(2):236-243,8.DOI:10.14136/j.cnki.issn1673-2812.2026.02.009
典型MOFs的制备及其水蒸气吸附性能
Synthesis of Typical MOFs and its Adsorption Properties for Water Vapor
摘要
Abstract
Metal organic frameworks(MOFs)have promising application prospects on desiccant rotary air conditioning systems.Four kinds of MOFs,including MIL-101(Cr),HKUST-1,MOF-808 and UIO-66,were firstly prepared solvothermally and mechanochemically.Analyses were then conducted on the synthesized samples by X-ray diffractions(XRD),scanning electron microscopies(SEM),thermogravimetric(TG)curves as well as the adsorption data of nitrogen at-196℃.Measurements of the adsorption isotherms of water vapor and the hydro-stability of the samples were finally performed at 25℃within the relative pressure range P/P0=0-0.9.The results show that,among as-prepared samples,sample MIL-101(Cr)had the highest specific surface area and the largest micro-pore volume,as well as the largest adsorption amount of water vapor about 1.51 g/g,which is 5.8 times that of the commercial desiccant material.Meanwhile,the relative decrement in adsorption capacity on this MIL-101(Cr)sample within ten adsorption-desorption cycles of the water vapor is 3.8%,which is the smallest among the samples concerned.Selecting MIL-101(Cr)as a desiccant material for a rotary desiccant system is therefore preferable.关键词
金属有机骨架材料/吸附/水蒸气/转轮除湿Key words
Metal-organic framework materials/Adsorption/Water vapor/Rotary desiccant分类
化学化工引用本文复制引用
陈博,陈昌源,郑超瑜,丁德锋,朱子文..典型MOFs的制备及其水蒸气吸附性能[J].材料科学与工程学报,2026,44(2):236-243,8.基金项目
国家自然科学基金(22108092) (22108092)
福建省自然科学基金(2023J01781,2023J01782) (2023J01781,2023J01782)