| 注册
首页|期刊导航|光学精密工程|数字散斑干涉应力应变同步测量

数字散斑干涉应力应变同步测量

谢翟子 牛海莎 苏信晨 冯浩博 彭璐 吴思进

光学精密工程2026,Vol.34Issue(9):1379-1389,11.
光学精密工程2026,Vol.34Issue(9):1379-1389,11.DOI:10.37188/OPE.20263409.1379

数字散斑干涉应力应变同步测量

Simultaneous stress-strain measurement using digital speckle pattern interferometry

谢翟子 1牛海莎 1苏信晨 1冯浩博 1彭璐 2吴思进1

作者信息

  • 1. 北京信息科技大学 仪器科学与光电工程学院,北京 102206
  • 2. 交通运输部公路科学研究院,北京 100088
  • 折叠

摘要

Abstract

Optical glass presents significant challenges for strain-stress measurement,and full-field syn-chronous acquisition remains difficult to achieve.An opposed dual-path measurement system based on Dig-ital Speckle Pattern Interferometry(DSPI)is developed.Synchronous triggering is realized using signals from a tensile testing machine,with a maximum acquisition delay of less than 2.2 s.System accuracy is evaluated through Finite Element Analysis(FEA).Parallel reflective and transmissive optical paths are employed to extract surface speckle and birefringence phase information.Axial tensile tests are conducted on quartz glass specimens under loads ranging from 50 N to 170 N,enabling synchronous acquisition of full-field strain and stress data.Repeatability tests confirm the stability and general applicability of the re-sults.An equal-scale finite element model is established,and experimental results are systematically com-pared with simulations.Measurement errors and their sources are analyzed in detail.Experimental contour maps show strong agreement with simulation results.The average relative error in strain over the full range is 9.2%,while the stress measurement error is controlled within 7.8%.Measured values are slight-ly higher than simulated ones.The discrepancies are primarily attributed to loading eccentricity,fixture preload,and geometric coupling effects induced by oblique incidence.Additional bending moments and de-flections are captured by the proposed system but are absent in idealized FEA models.The system satisfies engineering analysis requirements and demonstrates distinct advantages in full-field synchronous measure-ment.It provides effective support for failure analysis and optimization of optical components and exhibits strong adaptability to complex force-optical coupling environments.

关键词

数字散斑干涉/应力应变同步测量/双光路系统/光学玻璃

Key words

digital speckle pattern interferometry/simultaneous stress and strain measurement/dual-path optical system/optical glass

分类

机械制造

引用本文复制引用

谢翟子,牛海莎,苏信晨,冯浩博,彭璐,吴思进..数字散斑干涉应力应变同步测量[J].光学精密工程,2026,34(9):1379-1389,11.

基金项目

国家自然科学基金资助项目(No.61805017) (No.61805017)

光学精密工程

1004-924X

访问量0
|
下载量0
段落导航相关论文