| 注册
首页|期刊导航|塑料科技|可穿戴SWCNTs/WEP柔性传感器的制备及其性能研究

可穿戴SWCNTs/WEP柔性传感器的制备及其性能研究

王维枫 王建淞 李启志 汪英 解云琪 褚茜宁 马克明

塑料科技2026,Vol.54Issue(5):64-70,7.
塑料科技2026,Vol.54Issue(5):64-70,7.DOI:10.15925/j.cnki.issn1005-3360.2026.05.012

可穿戴SWCNTs/WEP柔性传感器的制备及其性能研究

Research on Preparation and Performance of Wearable SWCNTs/WEP Flexible Sensors

王维枫 1王建淞 1李启志 1汪英 2解云琪 2褚茜宁 2马克明1

作者信息

  • 1. 沈阳航空航天大学材料科学与工程学院,辽宁 沈阳 110136
  • 2. 沈阳航空航天大学航空宇航学院,辽宁 沈阳 110136
  • 折叠

摘要

Abstract

With the development of health monitoring technology,developing flexible sensors that exhibit a wide strain range,high sensitivity,and good stability had become a research hotspot.In the study,a single-walled carbon nanotube/waterborne epoxy resin(SWCNTs/WEP)composite film sensor was fabricated using an inkjet printing process.By optimizing the piezoelectric printhead voltage waveform parameters(rise time of 20 μs,fall time of 50 μs,dwell time of 40 μs,and echo voltage of 25 V)and the rheological properties of the ink(viscosity adjusted to 5~20 mPa·s),the issue of satellite droplets was resolved,and uniform dispersion of SWCNTs in the WEP matrix was achieved.The results showed that the effective sensing range of the sensor was 0~61%,and the gauge factor(GF)increased significantly with strain,reaching a maximum of 658.2 in the strain range of 57%~61%.The sensor exhibited a response time of 76 ms and a recovery time of 88 ms.After 2 400 cycles fatigue tests,the fluctuation of the relative resistance change was less than 5%,demonstrating excellent stability.In practical applications,the sensor successfully monitored various human motions such as swallowing,finger bending,wrist bending,and elbow bending,with the resistance signals being highly consistent with the motion amplitudes.The study provides a new approach for the design of low-cost,high-reliability wearable flexible sensors,showing broad application prospects in the field of healthcare monitoring.

关键词

可穿戴传感器/SWCNTs/WEP复合材料/喷墨打印/高灵敏度/人体运动监测

Key words

Wearable sensor/SWCNTs/WEP composites/Inkjet printing/High sensitivity/Human motion monitoring

分类

通用工业技术

引用本文复制引用

王维枫,王建淞,李启志,汪英,解云琪,褚茜宁,马克明..可穿戴SWCNTs/WEP柔性传感器的制备及其性能研究[J].塑料科技,2026,54(5):64-70,7.

基金项目

教育部春晖计划基金项目(HZKY20220428) (HZKY20220428)

沈阳市U35顶尖青年人才项目(RC230010) (RC230010)

中国航空科学基金项目(20220003054001) (20220003054001)

辽宁省研究生教育改革项目(LNYJG202405) (LNYJG202405)

辽宁省高校基本科研业务费项目(LJ222410143079、LJ232410143005) (LJ222410143079、LJ232410143005)

塑料科技

1005-3360

访问量0
|
下载量0
段落导航相关论文