| 注册
首页|期刊导航|机械与电子|基于电感线性温漂特征的嵌入式拟合补偿算法研究

基于电感线性温漂特征的嵌入式拟合补偿算法研究

张远 王国建 鞠洪福 卢西娅 汪阳生

机械与电子2026,Vol.44Issue(5):24-29,6.
✕
机械与电子2026,Vol.44Issue(5):24-29,6.

基于电感线性温漂特征的嵌入式拟合补偿算法研究

Research on an Embedded Compensation Algorithm Based on the Linear Temperature Drift Characteristics of Inductance

张远 1王国建 1鞠洪福 1卢西娅 1汪阳生2

作者信息

  • 1. 贵州新安航空机械有限责任公司,贵州 安顺 561000
  • 2. 贵州理工学院航空航天工程学院,贵州贵阳 550025||贵州新安航空机械有限责任公司博士后科研工作站,贵州安顺 561000
  • 折叠

摘要

Abstract

An embedded fitting compensation algorithm is proposed in present study,so that to address the precision degradation in magnetoresistive position sensor caused by ambient temperature-induced drift.The algorithm leverages the resistance of the internal coil as a proxy to reflect real-time temperature parameters.By comparing these parameters with the calibration baseline and incorporating them into a lin-ear functional relationship between inductance drift and temperature variation,the inductance values are dynamically corrected to achieve robust temperature compensation.Engineering validation demonstrates that the proposed algorithm significantly enhances the detection accuracy of the sensor.Within the specified operating temperature range,the position detection drift is reduced to less than 0.15 mm,representing a 58%improvement in precision.The results indicate that the sensor exhibits superior environmental adapta-bility under fluctuating thermal conditions.

关键词

磁阻式位置传感器/温度漂移/补偿算法/Ansoft Maxwell仿真

Key words

magnetoresistive position sensor/temperature drift/compensation algorithm/Ansoft Max-well simulation

分类

信息技术与安全科学

引用本文复制引用

张远,王国建,鞠洪福,卢西娅,汪阳生..基于电感线性温漂特征的嵌入式拟合补偿算法研究[J].机械与电子,2026,44(5):24-29,6.

基金项目

贵州省科技计划项目(黔科合成果[2024]一般107) (黔科合成果[2024]一般107)

机械与电子

1001-2257

访问量0
|
下载量0
段落导航相关论文