空气动力学学报2026，Vol.44Issue(5)：132-147,16.DOI:10.7638/kqdlxxb-2025.0131
翼上发动机布局多学科耦合伴随减阻优化
Adjoint-based multidisciplinary drag reduction optimization of over-the-wing engine configuration
摘要
Abstract
An important development for the next generation of civil aircraft is the significant reduction of fuel consumption through the integration of high-bypass-ratio(BPR)engines.However,the large diameter of such engines poses ground clearance challenges for traditional wing-mounted configurations.The over-the-wing engine mount(OWEM)configuration avoids this issue by installing engines above the wings.Furthermore,mounting engines above the wing's trailing edge offers inherent aerodynamic advantages,such as weakening the shock wave intensity on the wing's upper surface.Nevertheless,compared with conventional configurations,the OWEM configuration is more sensitive to upper-surface flow,making it prone to lift degradation and strong engine-wing interference.During the design process,critical interactions among wing shape changes,wing static aeroelastic deformation,engine installation position,and engine inlet/exhaust effects must be fully considered,which pose significant challenges to traditional design methods based directly on cruise configuration.To address these challenges,this paper establishes a forward aerodynamic optimization design framework based on the open-source multidisciplinary coupled optimization platform OpenMDAO and an open-source adjoint solver.The framework simultaneously accounts for the influence of the aforementioned multidisciplinary coupling effects on the wing upper-surface flow during optimization,enabling a forward design workflow that directly optimizes from the jig shape to the cruise shape.The proposed method is then applied to the drag reduction problem of an OWEM configuration.Results show an 11.14%drag reduction during cruise without loss of lift and while satisfying structural stress constraints.Optimization results indicate that placing the engine near the shock wave location of the clean wing and adjusting its vertical position to minimize interference with the wing flow helps reduce shock wave drag and interference drag without excessively compromising lift.Moreover,coupling wing shape optimization with static aeroelastic deformation during engine positioning optimization improves the spanwise load distribution and reduces induced drag,thereby forming an overall design that effectively leverages the advantages of the OWEM configuration.This study aims to provide a reference for the engineering application of similar OWEM configurations in the future.关键词
翼上发动机/多学科耦合/伴随方法/静气弹/干扰阻力Key words
over-the-wing engine mount/multidisciplinary coupling/adjoint method/static aeroelasticity/interference resistance分类
航空航天引用本文复制引用
秦飞,张傲,余闯,陈宪,高宜胜..翼上发动机布局多学科耦合伴随减阻优化[J].空气动力学学报,2026,44(5):132-147,16.基金项目
南京航空航天大学基本科研业务费科研项目科研基地创新基金(理工类)(NJ2025027) （理工类）
