铜业工程Issue(3)：24-32,9.DOI:10.3969/j.issn.1009-3842.2026.03.003
顶吹炉连续炼铜工艺决策优化系统研究
Decision Optimization System for Continuous Copper Smelting Process in Top Blown Furnace
崔景瑞 1陈一波 2刘晔1
作者信息
- 1. 江西铜锐信息技术有限公司,江西 南昌 330096
- 2. 江铜国兴(烟台)铜业有限公司,山东 烟台 264000
- 折叠
摘要
Abstract
As the core equipment of the domestically developed hot-state triple-furnace continuous copper smelting system,the multi-lance top-blown furnace still requires further improvement in process monitoring and intelligent decision-making capabilities.Current challenges include delayed parameter adjustments,pronounced fluctuations in furnace conditions,and suboptimal continuity in production.This research developed a decision optimization system for top-blown furnace operations by integrating metallurgical modeling,industrial data acquisition,and software development.Based on the metallurgical reaction mechanism,the input-output mathematical model of the top-blown furnace was established to enable quantitative determination of core operating parameters such as flux dosage and oxygen volume.A calculation model for key process parameters was created to overcome limitations in real-time process state perception during continuous smelting.Through systematic integration,modules for data acquisition and model computation were encapsulated into a comprehensive decision optimization system.The system provided accurate calculation and decision support for core control parameters.It significantly reduced the uncertainty associated with manual operations but also provided effective technical support for dynamic multi-process coordination and control within the hot-state triple-furnace continuous copper smelting process.关键词
铜冶炼/冶金数模/多枪顶吹吹炼炉/连续炼铜/数值模拟/正交试验Key words
copper smelting/metallurgical modeling/multi-lance top-blown furnace/continuous copper smelting/numerical calculation/orthogonal test分类
矿业与冶金引用本文复制引用
崔景瑞,陈一波,刘晔..顶吹炉连续炼铜工艺决策优化系统研究[J].铜业工程,2026,(3):24-32,9.
