| 注册
首页|期刊导航|冶金动力|多级生化+臭氧工艺处理系统及应用

多级生化+臭氧工艺处理系统及应用

范益春 范春健 张建国 师培俭 郑利军

冶金动力Issue(3):93-98,6.
✕
冶金动力Issue(3):93-98,6.

多级生化+臭氧工艺处理系统及应用

Multi-Stage Biochemical+Ozone Process Treatment System and Its Application

范益春 1范春健 2张建国 1师培俭 1郑利军1

作者信息

  • 1. 宝武水务科技有限公司山西分公司,山西 太原 030003
  • 2. 宝武水务科技有限公司,上海 201900
  • 折叠

摘要

Abstract

The wastewater treatment system of a steel plant in northern China has a designed scale of 58,000 t/d,mainly treating membrane system brine and denitrification wastewater from the iron and steel industry.The main process adopts a multi-stage biochemical+ozone process.This ar-ticle introduces the main design parameters of each process unit and analyzes the operational perfor-mance from October 2024 to September 2025.The analysis results show that the average effluent val-ues of chemical oxygen demand(COD<sub>Cr</sub>),ammonia nitrogen,and total phosphorus are 23.5 mg/L,0.66 mg/L,and 0.09 mg/L,respectively,meeting the Class Ⅴ surface water quality standard of the"Environmental Quality Standards for Surface Water,GB 3838-2002".The average effluent total nitrogen value is 10.4 mg/L,meeting the requirements of the"Discharge Standard of Water Pollutants for Iron and Steel Industry,GB 13456-2012".

关键词

钢铁废水/高盐/生化处理/臭氧/地表水Ⅴ类标准

Key words

iron and steel wastewater/high salinity/biochemical treatment/ozone/Class Ⅴ sur-face water standard

分类

资源环境

引用本文复制引用

范益春,范春健,张建国,师培俭,郑利军..多级生化+臭氧工艺处理系统及应用[J].冶金动力,2026,(3):93-98,6.

冶金动力

1006-6764

访问量0
|
下载量0
段落导航相关论文