中国塑料2026，Vol.40Issue(6)：96-103,8.DOI:10.19491/j.issn.1001-9278.2026.06.016
RTP输氢管道管接头结构参数优化研究
Study on structural parameter optimization of joints for fiber-reinforced-thermoplastic hydrogen transmission pipelines
孙冰 1李亚娇 1朱一凡 1高源 1王树远 2赵中里 1吴大鸣 3盖云卿 2孙靖尧3
作者信息
- 1. 北京化工大学机电工程学院,北京 100029
- 2. 山东亚洪塑胶工业有限公司,山东 临沂 276699
- 3. 北京化工大学机电工程学院,北京 100029||有机无机复合材料全重实验室,北京 100029
- 折叠
摘要
Abstract
In this study,the cone sleeve joint commonly used in fiber-reinforced thermoplastic composite hydrogen trans-mission pipelines was selected.Its three-dimensional structure was modeled using SolidWorks,and simulations of its me-chanical and sealing performances were conducted via ANSYS.A multi-objective optimization problem was established with the maximum equivalent stress of the pipe inner layer and the contact pressure between the pipe inner layer and the mandrel as the optimization objectives,and the crimping amount at the sleeve as the optimization variable.The optimal crimping amount obtained was 1.99 mm.Subsequently,another multi-objective optimization problem was constructed,taking the maximum equivalent stress of the pipe inner layer,the contact pressure between the pipe inner layer and the mandrel,and the contact area as the optimization objectives,and the tooth height and tooth angle of the mandrel teeth as the optimization variables.The optimal tooth height and tooth angle were determined to be 1.60 mm and 52 °,respec-tively.A comparison between the predicted values of the Kriging model and the ANSYS simulation results indicated that the relative error of the equivalent stress was 2%,the relative error of the contact pressure was 0.7%,and the relative error of the contact area was 0.3%.Compared with the initial values,the maximum contact stress was increased by 24%,and the maximum equivalent stress of the inner layer was reduced by 30%,which effectively improved the com-prehensive performance of the pipeline joint.关键词
管道/锥套型管接头/静力学仿真/多目标参数优化Key words
pipe/conical sleeve pipe joint/static simulation/multi-objective parameter optimization分类
化学化工引用本文复制引用
孙冰,李亚娇,朱一凡,高源,王树远,赵中里,吴大鸣,盖云卿,孙靖尧..RTP输氢管道管接头结构参数优化研究[J].中国塑料,2026,40(6):96-103,8.
