| 注册
首页|期刊导航|物探与化探|基于脆性、断裂韧性和抗压强度的可压裂性评价模型及应用

基于脆性、断裂韧性和抗压强度的可压裂性评价模型及应用

丁娱娇 沈金松 刘树文 孙帅 金凤鸣 蒲秀刚

物探与化探2026,Vol.50Issue(3):489-499,11.
物探与化探2026,Vol.50Issue(3):489-499,11.DOI:10.11720/wtyht.2026.0018

基于脆性、断裂韧性和抗压强度的可压裂性评价模型及应用

A fractureability evaluation model based on brittleness,fracture toughness,and compressive strength and its application

丁娱娇 1沈金松 2刘树文 2孙帅 2金凤鸣 3蒲秀刚1

作者信息

  • 1. 中石油大港油田研究院,天津 300280
  • 2. 中国石油大学(北京) 地球物理学院,北京 102249
  • 3. 中石油大港油田分公司,天津 300280
  • 折叠

摘要

Abstract

Fracability serves as a critical indicator for assessing whether the production of unconventional oil and gas reservoirs can be increased by fracturing.Besides,it also represents a key parameter for evaluating shale oil wells.Currently,fracability evaluation is pri-marily conducted using the brittleness index based on the lithology or rock elasticity.However,due to the diversity of lithology and pore combinations,the elasticity and fracability of reservoirs may vary significantly even under identical lithological conditions.To address this issue,targeting the complex lithologies and diverse pores of shale oil reservoirs in the second member of the Kongdian Formation,Cangdong Sag,Bohai Bay Basin,this study proposes a reservoir fracability evaluation model that integrates the elastic-based brittleness index,compressive strength,and fault toughness.First,using the velocity and density data in array acoustic log data,elastic mechanical parameters,including the elastic modulus,Poisson's ratio,and Young's modulus,are calculated.Second,in combination with laboratory test results,the relationship between static and dynamic elastic moduli is established.Accordingly,elastic parameters,rock mechanics pa-rameters,and the elastic-based brittleness index are determined.Third,for well blocks lacking shear wave information in conventional log data,a method for estimating the shear wave velocities of shales and sandstones is developed based on the Xu-White model,porosity,and contents of various minerals in shales.This model enables the calculation of parameters for the engineering sweet spots of reservoirs.Finally,a typical well in the study area is selected to calculate its fracability index(FI),followed by a grading evaluation.The results of this study indicate that FI values of<0.45,0.45~0.55,and≥0.55 represent a low,moderate,and high fracability,respectively.The zones with low,moderate,and high fracability delineated in the study area agree well with the actual hydraulic fracturing results.This study provides a novel thought and technical approach for evaluating engineering sweet spots in shale oil exploration.

关键词

工程甜点/脆性指数/弹性参数/断裂韧性/可压裂性指数

Key words

engineering sweetness spot/brittleness index/elastic parameters/fracturing toughness/fracability index

分类

天文与地球科学

引用本文复制引用

丁娱娇,沈金松,刘树文,孙帅,金凤鸣,蒲秀刚..基于脆性、断裂韧性和抗压强度的可压裂性评价模型及应用[J].物探与化探,2026,50(3):489-499,11.

基金项目

国家自然科学基金面上项目"非常规储层水力压裂电磁监测方法与导电支撑剂反演成像研究"(42074127) (42074127)

大港油田页岩油科技项目"陆相页岩油规模增储上产与勘探开发关键技术研究"(2023ZZ15YJ02) (2023ZZ15YJ02)

物探与化探

1000-8918

访问量0
|
下载量0
段落导航相关论文