| 注册
首页|期刊导航|水利学报|大口径PCCP管道水力摩阻系数的实证研究

大口径PCCP管道水力摩阻系数的实证研究

李甲振 郭新蕾 韩瑞华 陈紫涵 郭永鑫 刘有志

水利学报2026,Vol.57Issue(7):1016-1024,9.
✕
水利学报2026,Vol.57Issue(7):1016-1024,9.DOI:10.3724/j.slxb.20260006

大口径PCCP管道水力摩阻系数的实证研究

Prototype tests on hydraulic friction parameters of large-diameter PCCP pipelines

李甲振 1郭新蕾 1韩瑞华 2陈紫涵 1郭永鑫 1刘有志1

作者信息

  • 1. 流域水循环与水安全全国重点实验室,中国水利水电科学研究院,北京 100038
  • 2. 内蒙古引绰济辽供水有限责任公司,内蒙古 乌兰浩特 137499
  • 折叠

摘要

Abstract

The hydraulic friction parameters of pipelines are among the most crucial hydraulic parameters for the operation scheduling and digital-intelligent construction of long-distance water diversion projects.For a long time,issues such as a wide variation range of recommended values and a lack of field calibration based on measured data have persisted,affecting pipe design and accurate regulation.Based on the prototype tests conducted on DN2800 and DN3200 pressure water pipelines of the Yinchuojiliao Water Diversion Project,this paper systematically studies the values and variation patterns of the Manning roughness coefficient,Hazen-Williams coefficient and equivalent rough-ness.The results indicate that the pipeline roughness coefficient decreases with increasing flow velocity and increases with increasing pipe diameter,showing a positive correlation with flow velocity to the power of-0.1.When a constant roughness coefficient is used,the calculation error for head loss can range from 10%to 20%.The measured Hazen-Williams coefficient ranges from 145 to 150,which is greater than the recommended values in most specifications.Assuming a constant Hazen-Williams coefficient can lead to a calculation error of 5%to 10%in head loss.The equivalent roughness of PCCP pipelines with cement mortar-lining should be taken as 0.05 mm.When the equivalent roughness is reduced from 0.05 to 0.01 mm for the velocity of 1.5 m/s,the roughness coefficients of DN2800 and DN3200 pipelines decrease from 0.1071 to 0.010 34 and from 0.010 83 to 0.010 46,respectively,representing reductions of 3.45%and 3.42%.This indicates that the roughness coefficient of 0.009 or lower cannot be achieved.

关键词

PCCP管道/水力摩阻系数/糙率系数/海曾-威廉系数/当量粗糙度

Key words

PCCP pipes/hydraulic friction parameters/roughness coefficient/Hazen-Williams coefficient/equiva-lent roughness

分类

建筑与水利

引用本文复制引用

李甲振,郭新蕾,韩瑞华,陈紫涵,郭永鑫,刘有志..大口径PCCP管道水力摩阻系数的实证研究[J].水利学报,2026,57(7):1016-1024,9.

基金项目

国家重点研发计划项目(2022YFC3202500) (2022YFC3202500)

国家自然科学基金项目(51609265,52179082) (51609265,52179082)

水利学报

0559-9350

访问量0
|
下载量0
段落导航相关论文