宿州学院学报2026，Vol.41Issue(6)：1-5,48,6.DOI:10.3969/j.issn.1673-2006.2026.06.001
FPGA多串口以太网适配器的可扩展架构设计
Scalable Architecture Design of FPGA Multi-serial Port Ethernet Adapter
摘要
Abstract
To address the limitations of traditional serial-to-Ethernet adapters-such as poor scalability,insufficient heterogeneous baud rate compatibility,and unreliable high-load transmission-this paper presents an FPGA-based dynamically reconfigurable multi-channel serial-Ethernet adapter system.Through hardware architecture and soft-ware algorithm optimizations,the system integrates a parallel processing engine for heterogeneous baud rates,enab-ling seamless compatibility with RS232,RS485,USB-Type-C,and other serial protocols while supporting simultane-ous multi-device connections at independent baud rates.The architecture employs a state machine polling control mechanism combined with FIFO cross-clock-domain buffering to ensure efficient real-time data management and re-solve the synchronization problem of data transmission across different clock domains.Further enhanced by byte packetization and timeout polling strategies,the system significantly improves fault tolerance and accuracy under high-load conditions.Experimental results demonstrate 100％,with an average transmission delay of 0.085 ms per byte;compared to traditional solutions,the transmission delay per byte has been reduced by 1.2 ms,significantly im-proving data transmission efficiency.Under high load conditions,the transmission accuracy of the system still rea-ches 99.886％,and there is no packet loss phenomenon,fully demonstrating the stability and reliability of the sys-tem in high-intensity data transmission.关键词
FPGA/可扩展架构/多串口以太网/异构波特率Key words
FPGA/scalable architecture/multi-serial port Ethernet/heterogeneous baud rate分类
信息技术与安全科学引用本文复制引用
陈家浩,方振国,刘子雄..FPGA多串口以太网适配器的可扩展架构设计[J].宿州学院学报,2026,41(6):1-5,48,6.基金项目
安徽省新时代育人质量工程项目(2023cxcysj100) （2023cxcysj100）
安徽省质量工程项目(2021fwxxcy039). （2021fwxxcy039）
