| 注册
首页|期刊导航|光学精密工程|户外适应的主缆空隙率结构光测量系统

户外适应的主缆空隙率结构光测量系统

罗利 马瑞 邹易清 张皓 王跃学 王晓浩 李星辉

光学精密工程2026,Vol.34Issue(15):2317-2330,14.
✕
光学精密工程2026,Vol.34Issue(15):2317-2330,14.DOI:10.37188/OPE.20263415.2317

户外适应的主缆空隙率结构光测量系统

Outdoor-adapted structured light measurement system for main cable void ratio

罗利 1马瑞 1邹易清 2张皓 2王跃学 2王晓浩 1李星辉1

作者信息

  • 1. 清华大学 深圳国际研究生院,广东 深圳 518055
  • 2. 柳州欧维姆机械股份有限公司,广西 柳州 545005
  • 折叠

摘要

Abstract

Accurate non-contact measurement of the main cable void ratio remains challenging under strong sunlight,high temperature,and high humidity during outdoor cable-compaction construction.To address this issue,a main-cable void-ratio measurement system based on cooperative acquisition by multi-ple area structured-light cameras was developed.Four area structured-light cameras were arranged at 90° intervals around the main cable to acquire full-circumference point clouds of the cable surface.To improve imaging stability and environmental adaptability under complex outdoor conditions,mechanical shading,a thermoelectric cooling unit,and a window heating film were integrated into the system.For multi-camera calibration,Zhang's calibration method constrained by field-of-view overlap was employed to obtain the global extrinsic parameters of the four cameras,unify the multi-camera coordinate system,and achieve high-precision point-cloud registration.Experiments demonstrated that the system could stably acquire high-quality main-cable point clouds at 50℃,high humidity,and an illumination intensity of 105 lx.The average reprojection error of the multi-camera joint calibration was less than 0.7 pixels,millimeter-level spatial registration of the main-cable point cloud was achieved,and the relative error in main-cable cross-sectional area measurement was below 0.3%.These results demonstrate the feasibility and engineering applicability of the proposed system for non-contact precision measurement of main-cable void ratio in out-door cable-compaction construction.

关键词

主缆空隙率/户外紧缆施工/环境适应/面结构光相机/多相机标定

Key words

main cable void ratio/outdoor cable-compaction construction/environmental adaptation/ar-ea structured-light camera/multi-camera calibration

分类

机械制造

引用本文复制引用

罗利,马瑞,邹易清,张皓,王跃学,王晓浩,李星辉..户外适应的主缆空隙率结构光测量系统[J].光学精密工程,2026,34(15):2317-2330,14.

基金项目

深圳市科技计划资助项目(No.JCYJ20240813112003005) (No.JCYJ20240813112003005)

光学精密工程

1004-924X

访问量0
|
下载量0
段落导航相关论文