机械制造与自动化2026，Vol.55Issue(4)：15-18,52,5.DOI:10.19344/j.cnki.issn1671-5276.2026.04.003
切削参数对TC11钛合金曲面铣削性能的影响
Influence of Cutting Parameters on Milling Performance of TC11 Titanium Alloy Curved Surfaces
摘要
Abstract
Using the single-factor control variable method,curved surface milling experiments on TC11 titanium alloy were conducted to investigate the effects of four independent factors—cutting speed,feed per tooth,cutting depth,and stepover—on cutting force,cutting temperature,and surface quality during curved surface milling.The experimental results indicate that feed per tooth is the main influencing factor on the resultant radial force,while cutting speed has the least influence.Feed per tooth has the greatest impact on cutting temperature,whereas cutting depth has the smallest influence.The main influencing factor on surface roughness is stepover;a smaller stepover combined with a larger feed per tooth can achieve lower surface roughness.Better surface quality is obtained under the cutting parameters of V=80 m/min,fz=0.04 mm/z,ap=0.25 mm,and ae=0.1 mm.关键词
TC11钛合金/曲面铣削/切削力/切削温度/表面质量Key words
TC11 titanium alloy/curved surface milling/cutting force/cutting temperature/surface quality分类
矿业与冶金引用本文复制引用
蒋志贤,孙富建..切削参数对TC11钛合金曲面铣削性能的影响[J].机械制造与自动化,2026,55(4):15-18,52,5.基金项目
湖南省自然科学基金面上项目(2023JJ30255) （2023JJ30255）
湖南省教育厅科研项目重点项目(23A0354) （23A0354）
