| 注册
首页|期刊导航|轻工机械|冰箱蒸发器化霜试验研究及数值模拟

冰箱蒸发器化霜试验研究及数值模拟

苏义凌 赵伟 赵张驰 薛洋 魏宁

轻工机械2026,Vol.44Issue(4):25-35,11.
✕
轻工机械2026,Vol.44Issue(4):25-35,11.DOI:10.3969/j.issn.1005-2895.2026.04.004

冰箱蒸发器化霜试验研究及数值模拟

Experimental Investigation and Numerical Simulation of Defrosting Process on Refrigerator Evaporator

苏义凌 1赵伟 1赵张驰 1薛洋 2魏宁3

作者信息

  • 1. 江南大学 机械工程学院,江苏 无锡 214122||江南大学 江苏省食品先进制造装备技术重点实验室,江苏 无锡 214122||江南大学 江苏省微纳增减材制造工程研究中心,江苏 无锡 214122
  • 2. 江南大学 机械工程学院,江苏 无锡 214122||江南大学 江苏省食品先进制造装备技术重点实验室,江苏 无锡 214122||江南大学 江苏省微纳增减材制造工程研究中心,江苏 无锡 214122||美的集团全球创新中心,广东 佛山 528311||美的集团研究中心,广东 佛山 528311
  • 3. 江南大学 机械工程学院,江苏 无锡 214122||江南大学 江苏省食品先进制造装备技术重点实验室,江苏 无锡 214122||江南大学 江苏省微纳增减材制造工程研究中心,江苏 无锡 214122||江南大学 特种防护纺织品教育部重点实验室,江苏 无锡 214122
  • 折叠

摘要

Abstract

To quantitatively elucidate the influence of frost-layer physical properties on heat transfer and phase-change characteristics during defrosting of refrigerator evaporators,the research group constructed a combined experimental observation and numerical simulation approach to investigate experimental studies and systematic numerical simulation analyses on the melting behavior under different frost thickness and density conditions.In the experiments,frost layers with various physical properties were generated by controlling frosting conditions,and the melting process and temperature responses during defrosting were measured.In the numerical simulation,a frost-melting model was established based on the enthalpy-porosity method,and transient calculations were performed for the defrosting process,which were used to analyze the effects of frost parameter variations on melting dynamics.The results show that when the initial frost thickness increase from 1.000 mm to 3.000 mm,the complete melting time prolongs from 74 s to 108 s,representing an increase of approximately 45%.When the frost density increases from 150 kg/m3 to 450 kg/m3,the melting time extends from 93 s to 176 s,corresponding to an increase of 89%,indicating that frost density variations have a significantly stronger impact on the latent heat load during defrosting than frost-layer thickness variations.Quantitative relationships between frost physical properties,melting duration,and heating rate are established,providing a reference for defrosting strategy optimization and energy-efficient operation of evaporators.

关键词

冰箱蒸发器/霜层/化霜/相变特性/焓-孔隙率模型/融化动力学

Key words

refrigerator evaporator/frost-layer/defrosting/phase-change characteristic/enthalpy-porosity method/melting dynamic

分类

机械制造

引用本文复制引用

苏义凌,赵伟,赵张驰,薛洋,魏宁..冰箱蒸发器化霜试验研究及数值模拟[J].轻工机械,2026,44(4):25-35,11.

基金项目

中央高校基本科研业务费专项资金(JUSRP202501128) (JUSRP202501128)

特种防护纺织品教育部重点试验室项目(ZFH-24-004). (ZFH-24-004)

轻工机械

1005-2895

访问量0
|
下载量0
段落导航相关论文