红外技术2026，Vol.48Issue(8)：960-968,9.
可重构的基-2/3/22多路延迟换向器FFT架构
Reconfigurable Radix-2/3/22 Multi-Path Delay Commutator Fast Fourier Transform Architectures
牟新刚 1詹遇魁 1周晓1
作者信息
- 1. 武汉理工大学 机电工程学院,湖北 武汉 430070
- 折叠
摘要
Abstract
The fast Fourier transform(FFT)is widely used in signal processing.However,traditional FFT processing usually needs to fill zeros when dealing with non-power-of-two points,which not only wastes considerable resources but also increases the processing time.This study improved the two-parallel radix-MDC FFT architecture and developed a reconfigurable radix-MDC FFT architecture that reduced the number of multipliers by 50%.This architecture reconfigured the same hardware resources into radix-2,radix-3,and radix-22 processing units,and 16 FFT operations with 1024 points could be achieved.The architecture was implemented in Verilog.Experimental results showed that the optimum performance was achieved when using 25-bit fixed-point quantization,with an average error of 10-4,a maximum error of 10-3,and a quantization signal-to-noise ratio of 92.19 dB.Compared with other designs found in the literature,the FFT architecture developed in this study had fewer multiplier resources,the greatest computational efficiency,and good application prospects.关键词
快速傅里叶变换/多路延迟换向器/现场可编程门阵列Key words
FFT/MDC/FPGA分类
信息技术与安全科学引用本文复制引用
牟新刚,詹遇魁,周晓..可重构的基-2/3/22多路延迟换向器FFT架构[J].红外技术,2026,48(8):960-968,9.
