| 注册
首页|期刊导航|岩土工程学报|基于不同试验方法的岩体结构面基本摩擦角比较分析

基于不同试验方法的岩体结构面基本摩擦角比较分析

朱佳云 唐志成 杜时贵 吕原君 宋佳敏 余乔娟

岩土工程学报2026,Vol.48Issue(9):1869-1879,11.
✕
岩土工程学报2026,Vol.48Issue(9):1869-1879,11.DOI:10.11779/CJGE20250714

基于不同试验方法的岩体结构面基本摩擦角比较分析

Comparative analysis on basic friction angles of rock joints using different experimental methods

朱佳云 1唐志成 2杜时贵 1吕原君 1宋佳敏 1余乔娟1

作者信息

  • 1. 宁波大学岩石力学研究所,浙江 宁波 315211
  • 2. 绍兴大学深部金属矿智能开采与装备全国重点实验室,浙江 绍兴 312000
  • 折叠

摘要

Abstract

The basic friction angle of rock joints is a key parameter for stability assessment in rock mass engineering and determination of slope instability.The reliability of its testing methods directly governs the representativeness and applicability of this parameter.Focusing on common basic friction angle testing methods such as direct shear tests,tilt tests,push-pull tests,and rebound tests,this study obtains the mechanical properties of rock joints.Using green sandstone and granite as test specimens,the test data based on different testing methods are collected and comparatively analyzed.The results show that:In direct shear and push-pull tests,the stress state of structural planes is significantly affected by the sliding distance of specimens;in tilt tests,the stress state is related to the rotation angle and dimensions of specimens.During direct shear tests,normal stress induces strong interlocking and frictional effects on joints,resulting in higher test data than other methods.As normal stress increases,the basic friction angle first decreases and then stabilizes.Excessively high normal stress or multiple repeated tests,however,causes damage and fracturing of rock joints,leading to greater data dispersion.In both tilt and push-pull tests,the basic friction angle decreases with an increase in the number of tests.Specifically,the data from push-pull tests are 1°-2° higher than those from tilt tests,with smaller dispersion.Data from rebound tests exhibit significant fluctuations,which are influenced by the surface condition of specimens and impact conditions.This research provides a basis for theoretical studies and engineering applications of the basic friction angle of rocks.

关键词

基本摩擦角/岩体结构面/试验方法/比较分析

Key words

basic friction angle/rock joints/testing methods/comparative analysis

分类

建筑与水利

引用本文复制引用

朱佳云,唐志成,杜时贵,吕原君,宋佳敏,余乔娟..基于不同试验方法的岩体结构面基本摩擦角比较分析[J].岩土工程学报,2026,48(9):1869-1879,11.

基金项目

国家自然科学基金项目(42177165,42407210) (42177165,42407210)

浙江省教育厅科研项目(Y202456626) (Y202456626)

宁波市自然科学基金项目(2023J085,2024J186)This work was supported by the National Natural Science Foundation of China(Grant Nos.42177165,42407210),Scientific Research Projects of Zhejiang Provincial Department of Education(Grant No.Y202456626)and Ningbo Natural Science Foundation(Grant Nos.2023J085,2024J186). (2023J085,2024J186)

岩土工程学报

1000-4548

访问量0
|
下载量0
段落导航相关论文