| 注册
首页|期刊导航|纺织工程学报|Cu-TiO2纳米薄膜制备及光催化降解染料废水性能

Cu-TiO2纳米薄膜制备及光催化降解染料废水性能

孙世凯 张诚 孙利 袁志刚 梅顺齐 孟凡贺

纺织工程学报2026,Vol.4Issue(4):68-74,7.
✕
纺织工程学报2026,Vol.4Issue(4):68-74,7.DOI:10.20150/j.cnki.fzgcxb.2026.04.006

Cu-TiO2纳米薄膜制备及光催化降解染料废水性能

Preparation of Cu-TiO2 nanofilms and their performance in photocatalytic degradation of dye wastewater

孙世凯 1张诚 1孙利 2袁志刚 2梅顺齐 2孟凡贺2

作者信息

  • 1. 武汉纺织大学 机械工程与自动化学院,湖北 武汉 430200
  • 2. 武汉纺织大学 机械工程与自动化学院,湖北 武汉 430200||武汉纺织大学 湖北省数字化纺织装备重点实验室,湖北 武汉 430200
  • 折叠

摘要

Abstract

Anatase-phase Cu-doped TiO2(Cu-TiO2)modified nanofilms were successfully prepared via direct current(DC)magnetron sputtering.The doping concentration and modification degree and were precisely controlled by adjust-ing the Cu sputtering power.The microstructure,surface morphology,and optical properties of the nanofilms were sys-tematically characterized using ultraviolet-visible diffuse reflectance spectroscopy(UV-Vis DRS),atomic force micros-copy(AFM),and scanning electron microscopy(SEM).Photocatalytic degradation experiments under simulated natural light showed that the Cu-TiO2 nanofilm prepared at a Cu sputtering power of 9 W exhibited the optimal photocatalytic ac-tivity:for 15 mg/L methyl orange solution,the degradation rate reached 91.5%within 50 minutes,which was 45%high-er than that of undoped pure TiO2 nanofilms.The photocatalytic cycle stability test demonstrated that the catalyst re-mained effective after five cycles,maintaining a degradation rate of 87.6%within 50 minutes.In addition,the film-based catalyst also has the advantages of high stability,easy recovery,and high reusability,showing great application potential in the degradation of dye wastewater.

关键词

二氧化钛/光催化/铜/染料废水/磁控溅射

Key words

titanium dioxide/photocatalysis/copper/dye wastewater/magnetron sputtering

分类

轻工纺织

引用本文复制引用

孙世凯,张诚,孙利,袁志刚,梅顺齐,孟凡贺..Cu-TiO2纳米薄膜制备及光催化降解染料废水性能[J].纺织工程学报,2026,4(4):68-74,7.

基金项目

国家自然科学基金青年科学基金(11904268) (11904268)

纺织工程学报

2095-4131

访问量0
|
下载量0
段落导航相关论文