控制与信息技术Issue(4)：54-59,6.DOI:10.13889/j.issn.2096-5427.2026.04.008
基于参数关联驱动的三大件式转向架快速设计方法
Rapid Design Method for Three-Piece Bogies Driven by Parameter Association
摘要
Abstract
The design process for three-piece bogies of railway freight cars is complicated by multiple combinations of axle loads,track gauges,vehicle interfaces,and damping configurations,resulting in heavy workload for parameter query and reliance on manual module interface matching.This paper proposes a rapid design method driven by parameter association.A five-level parameter model is established:vehicle technical requirements,assembly,interfaces,components,and spring groups.Direct,calculated and conditional mappings are introduced for parameter passing.Strategies for module filtering,interface matching,and associated deformation of side frames and bolsters are integrated to generate assembly configuration,spring group schemes,three-dimensional models and BOMs accounting for project data.Verification based on a bogie design with a 25-t axle load,1,435-mm gauge bogie,and constant-friction damping shows the proposed method reduces the conceptual design cycle from 11-13 days to 3 days.关键词
铁路货车/三大件式转向架/研发数字化/快速设计/参数关联/模块化设计Key words
railway freight car/three-piece bogie/R&D digitalization/rapid design/parameter association/modular design分类
交通工程引用本文复制引用
黄雪燕,任丽娟,向志英,邹德顺..基于参数关联驱动的三大件式转向架快速设计方法[J].控制与信息技术,2026,(4):54-59,6.基金项目
中国中车股份有限公司重大专项科技研究开发计划项目(2026CKA673 （）
2026CKA674) （）
