| 注册
首页|期刊导航|化工学报|Millikelvin温区烧结式换热器流动与传热特性数值模拟研究

Millikelvin温区烧结式换热器流动与传热特性数值模拟研究

喻凡 王倩 崔文慧 刘琦 王少刚

化工学报2026,Vol.77Issue(8):4386-4398,13.
✕
化工学报2026,Vol.77Issue(8):4386-4398,13.DOI:10.11949/0438-1157.20260230

Millikelvin温区烧结式换热器流动与传热特性数值模拟研究

Numerical study of flow and heat transfer performance of porous-media heat exchanger in Millikelvin temperature regime

喻凡 1王倩 1崔文慧 1刘琦 1王少刚1

作者信息

  • 1. 中山先进低温技术研究院,广东 中山 528400
  • 折叠

摘要

Abstract

Kapitza thermal resistance at the interfaces between liquid helium and solid components significantly affects the flow and heat transfer performance of porous-media heat exchangers(PMHEs)in the Millikelvin temperature regime.To explore the influence of Kapitza thermal resistance on the heat transfer efficiency of sintered porous media heat exchangers,a clear understanding of its impact is essential for enhancing interfacial heat transfer efficiency in sintered heat exchangers.In this work,a local thermal non-equilibrium model is established,which comprehensively considers axial heat conduction,viscous dissipation effect and the variation characteristics of Kapitza thermal resistance with temperature,to describe the heat transfer behavior in the porous media region.Fluid flow within the sintered sponges is described using the Brinkman-Forchheimer equations.The results show that the proposed model can effectively capture the temperature jump phenomenon at the interface between liquid helium and solid.Based on the above model,the variation laws of temperature and pressure under different working conditions are analyzed,and the underlying heat transfer mechanism is revealed.Furthermore,the effects of Kapitza thermal resistance and axial heat conduction on heat transfer performance are investigated,and the influence mechanism of parameters such as flow rate,heat transfer area and sintering parameters on flow and heat transfer performance is systematically discussed.

关键词

多孔介质/Kapitza热阻/传热/数值模拟/局部热非平衡模型

Key words

porous media/Kapitza thermal resistance/heat transfer/numerical simulation/local thermal non-equilibrium model

分类

能源科技

引用本文复制引用

喻凡,王倩,崔文慧,刘琦,王少刚..Millikelvin温区烧结式换热器流动与传热特性数值模拟研究[J].化工学报,2026,77(8):4386-4398,13.

基金项目

广东省人才专项(2024TQ08A329) (2024TQ08A329)

化工学报

0438-1157

访问量0
|
下载量0
段落导航相关论文