| 注册
首页|期刊导航|化工学报|基于CPPID柱面投影设计方法的氢液化器氦透平膨胀机叶轮优化与流场分析

基于CPPID柱面投影设计方法的氢液化器氦透平膨胀机叶轮优化与流场分析

刘弘民 李空荣 柯长磊 左建生 郝昭璋 张晓华 彭楠 熊联友 刘立强

化工学报2026,Vol.77Issue(8):4431-4439,9.
✕
化工学报2026,Vol.77Issue(8):4431-4439,9.DOI:10.11949/0438-1157.20260106

基于CPPID柱面投影设计方法的氢液化器氦透平膨胀机叶轮优化与流场分析

Optimization and flow analysis of helium turbo-expander impeller for hydrogen liquefier through cylindrical projection-based design method

刘弘民 1李空荣 2柯长磊 2左建生 1郝昭璋 1张晓华 2彭楠 1熊联友 1刘立强1

作者信息

  • 1. 中国科学院理化技术研究所低温科学与技术重点实验室,北京 100190||中国科学院大学,北京 100049
  • 2. 中国科学院理化技术研究所低温科学与技术重点实验室,北京 100190
  • 折叠

摘要

Abstract

This paper addresses the lack of explicit physical mapping between blade geometry and internal flow in traditional impeller design methods for cryogenic turbine expanders.A cylindrical projection parametric impeller design method(CPPID)is proposed.This method enables precise parametric control of the three-dimensional impeller flow path by shaping the projected curves of the blade profiles(at the hub,center,and shroud)onto their respective reference cylindrical surfaces.The high-efficiency impeller of a 5 t/d hydrogen liquefier's final-stage helium turbo-expander(TEX3)served as the baseline for optimization.Maintaining constant refrigeration power and incidence angle,a systematic analysis of the key design parameter(Tu)was conducted.Numerical results demonstrate that the impellers redesigned using the CPPID method achieve higher isentropic efficiency while requiring less mass flow rate for the same refrigeration power.The center layer profile had the most pronounced impact on overall performance,while the shroud layer profile effectively manipulated vortex structures and suppressed high-loss passage vortices;the hub layer showed relatively minor influence.Specifically,the extremely concave shroud blade profile achieved an isentropic efficiency increase from 89.528%to 91.887%.This study validates the effectiveness of the CPPID method,providing a new approach for the refined design of high-performance turbo-expander impellers.

关键词

氢液化/透平膨胀机/叶轮设计/流场分析

Key words

hydrogen liquefaction/turbo-expander/impeller design/flow field analysis

分类

通用工业技术

引用本文复制引用

刘弘民,李空荣,柯长磊,左建生,郝昭璋,张晓华,彭楠,熊联友,刘立强..基于CPPID柱面投影设计方法的氢液化器氦透平膨胀机叶轮优化与流场分析[J].化工学报,2026,77(8):4431-4439,9.

基金项目

北京市科技计划项目(Z25110100040000) (Z25110100040000)

化工学报

0438-1157

访问量0
|
下载量0
段落导航相关论文