| 注册
首页|期刊导航|计量学报|高深径比微孔槽标准样板及其应用研究

高深径比微孔槽标准样板及其应用研究

陈露 袁群 高志山 封志明 王蓓 李新 刘辉 鞠涛 李翔 徐志毅 霍霄

计量学报2026,Vol.47Issue(8):1099-1106,8.
✕
计量学报2026,Vol.47Issue(8):1099-1106,8.DOI:10.3969/j.issn.1000-1158.2026.08.01

高深径比微孔槽标准样板及其应用研究

Research on High Aspect Ratio Micro-hole Standard Template and the Applications

陈露 1袁群 2高志山 2封志明 1王蓓 1李新 1刘辉 1鞠涛 3李翔 3徐志毅 2霍霄2

作者信息

  • 1. 江苏省计量科学研究院(江苏省能源计量数据中心),江苏 南京 210023
  • 2. 南京理工大学 电子工程与光电技术学院,江苏 南京 210094
  • 3. 中国科学院苏州纳米技术与纳米仿生研究所,江苏 苏州 215125
  • 折叠

摘要

Abstract

With the development of non-destructive testing technologies such as optical interference and spectral inversion,the demand for standardized measurement of high-aspect-ratio microstructures has become increasingly urgent.In order to achieve precise calibration of non-destructive measurement systems for high-aspect-ratio structures,a standard template of micro-hole with a depth-to-diameter ratio up to 20∶1 was developed.By optimizing the deep silicon etching process,the precise preparation of micro-hole with a high-aspect-ratio was achieved,ensuring the uniformity of the micro-hole structure.By adopting the three-level precise control section preparation and combining the geometric compensation characterization method,the high-quality preparation of the structural characterization section with a high-aspect-ratio was completed,and the precise measurement and calibration analysis of the diameter and depth dimensions of the standard template were achieved.Based on the calibration results from on-chip integrated slice holes and uniformity evaluation of the standard template,parameter assignment and calibration applications for standard holes were realized.The standard template has been applied to calibrate the near-infrared broad-spectrum interference microscopy measurement system,providing a physical reference standard for on-site calibration of non-destructive measurement instruments for high-aspect-ratio micro-hole in the semiconductor field.

关键词

几何量计量/高深径比/TSV微孔槽/标准样板/无损检测

Key words

geometric metrology/high-aspect-ratio/TSV micro-hole/standard template/non-destructive testing

分类

通用工业技术

引用本文复制引用

陈露,袁群,高志山,封志明,王蓓,李新,刘辉,鞠涛,李翔,徐志毅,霍霄..高深径比微孔槽标准样板及其应用研究[J].计量学报,2026,47(8):1099-1106,8.

基金项目

国家市场监督管理总局科技计划项目(2023MK038) (2023MK038)

计量学报

1000-1158

访问量0
|
下载量0
段落导航相关论文