计量学报2026,Vol.47Issue(8):1107-1114,8.DOI:10.3969/j.issn.1000-1158.2026.08.02
角度编码器动态计量性能的仿真测试方法研究
Research on Simulation Test Method of Dynamic Metrological Performance of Angle Encoder
摘要
Abstract
In order to improve the dynamic measurement performance detection method of the angle encoder subdivision module,a method of generating moire fringe signal based on numerical simulation is proposed.The simulation model of three typical motion modes is designed and realized to replace the traditional turntable excitation,which enhances the controllability and anti-interference of the input signal.The accuracy of the model is verified by comparing the time domain and frequency domain of the measured signal(in the uniform speed mode of 1°/s,the amplitude error of the fundamental wave of the simulation signal and the actual signal is less than 2%,the phase error is less than 1°,and the simulation signal has no redundant harmonic noise).The fixed amplitude error and fixed frequency error experiments are further completed.The dynamic error under the fixed amplitude angular vibration input of 2~100 Hz is less than 0.72″,and the dynamic error under the fixed frequency angular vibration input of 0.001°~0.01° is less than 0.38″.The results show that this method provides a feasible scheme for systematically testing the dynamic error of the subdivision module under different angular vibration signal inputs,and provides support for constructing the standard measurement method of the subdivision module.关键词
几何量计量/角度编码器/莫尔信号/数值仿真模型/细分模块Key words
geometric metrology/angle encoder/Moiré signal/numerical simulation model/subdivision module分类
通用工业技术引用本文复制引用
刘雨欣,黄垚,薛梓,李小亭..角度编码器动态计量性能的仿真测试方法研究[J].计量学报,2026,47(8):1107-1114,8.基金项目
国家自然科学基金(12441501) (12441501)
中国计量科学研究院基本科研业务费重点领域项目(AKYZD2213) (AKYZD2213)