计量学报2026,Vol.47Issue(8):1140-1146,7.DOI:10.3969/j.issn.1000-1158.2026.08.06
步入式恒温恒湿室的送风参数设定与效果分析
Setting and Impact Analysis of Air Supply Parameters for Walk-in Constant Temperature and Humidity Chamber
摘要
Abstract
The calibration of temperature and humidity instruments in high-precision constant temperature and humidity chambers can effectively improve metrological verification efficiency.To design a walk-in constant temperature and humidity chamber with sufficient accuracy for instrument calibration,CFD simulation software was employed to simulate and andanalyze the physical model of the chamber.The distribution of temperature and humidity fields inside the chamber was determined based on simulation results.The evaluation metrics included the average temperature,average humidity,temperature uniformity,and humidity uniformity of the chamber at steady state.Using air supply angle,air supply outlet position,and air supply volume as variables,nine air supply schemes were designed via the orthogonal experimental method.The results indicated that the air supply volume significantly impact the chamber's performance metrics,while the air supply angle and outlet position show no notable influence.The optimal air supply parameters were identified as an air supply angle of 10°,an air supply outlet positioned 30 cm from the top,and an air supply volume of 500 m³/h.This study provides theoretical guidance for the construction of high-precision constant temperature and humidity chambers.关键词
热学计量/恒温恒湿室/CFD仿真/正交试验/温湿度均匀度Key words
thermal metrology/constant temperature and humidity chambers/CFD simulation/orthogonal test/temperature and humidity uniformity分类
通用工业技术引用本文复制引用
曹高尚,孙坚,卓华,徐红伟,许素安,王亚丽..步入式恒温恒湿室的送风参数设定与效果分析[J].计量学报,2026,47(8):1140-1146,7.基金项目
国家自然科学基金(62373339) (62373339)
国家市场监管创新中心(中亚能源计量)项目(XJL2022KY002) (中亚能源计量)