计量学报2026,Vol.47Issue(8):1153-1160,8.DOI:10.3969/j.issn.1000-1158.2026.08.08
大地坐标系下ADCP流速流向校准系统设计
Design of ADCP Current Velocity and Direction Calibration System under Geodetic Coordinate System
摘要
Abstract
Acoustic Doppler current profiler(ADCP)is widely used in the measurement of current velocity profiles in rivers and oceans.The display and control software of imported ADCPs usually only outputs the combined velocity and direction in the geodetic coordinate system,and the velocity output accuracy in this coordinate system is affected by the static output jitter of the internal heading angle sensor.Based on this,a detail of the configuration parameters of ADCPs is conducted,and direction in the geodetic coordinate system is established.For the workhorse four-beam 600 kHz ADCP produced by RDI,a velocity and direction calibration system is designed using the acoustic simulation method.The focus is on discussing the frequency accuracy required by the system and the configuration method of the RDI ADCP for calibration using the acoustic simulation method.Calibration experiments are within the range of 0.2~5 m/s current velocity and 0~360° direction.The results show that by tracking and compensating for the heading angle jitter,the random error caused by the heading angle jitter can be reduced.This system can achieve the calibration of velocity and direction in the geodetic coordinate system,with a velocity measurement uncertainty less than(0.5%×simulated velocity value+0.005)m/s and a direction measurement uncertainty less than 0.8°.关键词
声学多普勒流速剖面仪/流速校准/流向校准/水声计量/不确定度评定Key words
acoustic doppler current profiler/flow rate calibration/flow direction calibration/hydroacoustic measurement/uncertainty分类
通用工业技术引用本文复制引用
彭近洋,郭世旭,焦君圣,陶然,史占红,方卫华..大地坐标系下ADCP流速流向校准系统设计[J].计量学报,2026,47(8):1153-1160,8.基金项目
国家重点研发计划(2022YFC3204504) (2022YFC3204504)