| 注册
首页|期刊导航|计量学报|参数共享双向补偿的风洞六分量天平静态标定

参数共享双向补偿的风洞六分量天平静态标定

梁宇龙 杨军 江文松 曹亦庆 罗哉 刘博宇

计量学报2026,Vol.47Issue(8):1161-1170,10.
✕
计量学报2026,Vol.47Issue(8):1161-1170,10.DOI:10.3969/j.issn.1000-1158.2026.08.09

参数共享双向补偿的风洞六分量天平静态标定

Static Calibration of Six-component Wind-tunnel Balance Based on Parameter-shared Bidirectional Compensation

梁宇龙 1杨军 2江文松 3曹亦庆 2罗哉 3刘博宇4

作者信息

  • 1. 中国计量大学 计量测试与仪器学院,浙江 杭州 310018||北京长城计量测试技术研究所,北京 100095
  • 2. 北京长城计量测试技术研究所,北京 100095
  • 3. 中国计量大学 计量测试与仪器学院,浙江 杭州 310018
  • 4. 中国航空工业空气动力研究院,辽宁 沈阳 110034
  • 折叠

摘要

Abstract

To address the issues of increased decoupling errors and mean drift of residuals for wind tunnel six-component balances under combined loading and positive-negative switching of main loads,a parameter-shared bidirectional compensation regression(PSBCR)calibration model is proposed to reduce both the maximum error and systematic bias simultaneously.This method decomposes the calibration model into a main calibration term shared in both positive and negative directions and a compensation term adjusted according to the sign of the main load in the second-order polynomial feature space,and jointly estimates the parameters using regularized regression.Here,single-component data is used to stabilize the main term parameters,while complex loading data is used to identify direction-related differences.Feature standardization and cross-validation are combined to determine the regularization coefficients.Experimental results show that this method reduces the drift in the residual mean from 0.030 0%FS to 0.004 8%FS,the maximum full-scale(FS)error from 0.088 8%FS to 0.067 5%FS,and the average root-mean-square error from 0.045 5%FS to 0.028 5%FS.The results verify that the model can improve decoupling accuracy and mitigate systematic shifts caused by direction switching under complex conditions,This approach is applicable to consistency calibration and data processing of positive and negative loads for wind tunnel six-component balances.

关键词

力学计量/风洞六分量天平/静态标定/岭回归/参数共享的双向补偿回归/双向性误差补偿

Key words

mechanical metrology/wind tunnel six-component balance/static calibration/ridge regression/PSBCR/bidirectional error compensation

分类

通用工业技术

引用本文复制引用

梁宇龙,杨军,江文松,曹亦庆,罗哉,刘博宇..参数共享双向补偿的风洞六分量天平静态标定[J].计量学报,2026,47(8):1161-1170,10.

基金项目

国家自然科学基金(52475576) (52475576)

计量学报

1000-1158

访问量0
|
下载量0
段落导航相关论文