| 注册
首页|期刊导航|含能材料|基于表面应变数据与物理信息神经网络的PBX内部残余应力场重构

基于表面应变数据与物理信息神经网络的PBX内部残余应力场重构

张浩 付涛 文乾乾 何洪途 孙文旭 颜熹琳

含能材料2026,Vol.34Issue(9):1026-1033,8.
✕
含能材料2026,Vol.34Issue(9):1026-1033,8.DOI:10.11943/CJEM2026115

基于表面应变数据与物理信息神经网络的PBX内部残余应力场重构

Reconstruction of Internal Residual Stress Field in PBX Based on Surface Strain Data and Physics-informed Neural Networks

张浩 1付涛 2文乾乾 2何洪途 3孙文旭 2颜熹琳4

作者信息

  • 1. 西南科技大学制造科学与工程学院,四川 绵阳 621010||中国工程物理研究院化工材料研究所化爆安全全国重点实验室,四川 绵阳 621999
  • 2. 中国工程物理研究院化工材料研究所化爆安全全国重点实验室,四川 绵阳 621999
  • 3. 西南科技大学制造科学与工程学院,四川 绵阳 621010
  • 4. 中国工程物理研究院化工材料研究所化爆安全全国重点实验室,四川 绵阳 621999||电子科技大学材料与能源学院,四川 成都 611731
  • 折叠

摘要

Abstract

Accurate characterization of the internal residual stress field in polymer-bonded explosives(PBX)is crucial for evaluat-ing structural integrity and service safety.However,traditional inversion methods struggle to reconstruct this distribution efficient-ly and with high precision.A novel residual stress inversion method integrating distributed optical fiber sensing with physics-informed neural networks(PINNs)was proposed.TATB-based PBX cylindrical specimens measuring ϕ110×120 mm served as the research objects.Strain release data during the layer-removal test were acquired in real time using optical frequency-domain reflectometry(OFDR)technology.A PINNs inversion model was constructed using Gaussian temperature-field parameters as intermediate variables.Physical constraints,including static equilibrium equations and boundary conditions,were embedded into the loss function.This approach achieved an efficient mapping from limited surface strain data to the internal stress field.Results indicate that the model achieves a coefficient of determination of 0.954.The inverted results strictly satisfy fundamental solid mechanics constraints.Compared with traditional finite element optimization-based inversion methods,the PINNs model requires only about 5 min for a single inference after offline training.The reconstructed internal stress field exhibits a typical"tension inside,compression outside"distribution pattern.The maximum tensile stress reaches 1.03 MPa at the core,while the maximum compressive stress reaches-0.77 MPa at the middle of the lateral surface.This distribution pat-tern aligns perfectly with the physical mechanism of residual stress generation caused by non-uniform shrinkage during the cool-ing process of thermal pressing.

关键词

高聚物粘结炸药(PBX)/光纤应变监测/物理信息神经网络/残余应力反演

Key words

polymer bonded explosive(PBX)/optical fiber strain monitoring/physics-informed neural network/residual stress in-version

分类

军事科技

引用本文复制引用

张浩,付涛,文乾乾,何洪途,孙文旭,颜熹琳..基于表面应变数据与物理信息神经网络的PBX内部残余应力场重构[J].含能材料,2026,34(9):1026-1033,8.

基金项目

国家自然科学基金面上项目(12572422)National Natural Science Foundation of China(No.12572422) (12572422)

含能材料

1006-9941

访问量0
|
下载量0
段落导航相关论文