含能材料2026,Vol.34Issue(9):1055-1067,13.DOI:10.11943/CJEM2026150
基于DNAN基炸药的点火增长模型参数研究
Research on Ignition and Growth Model Parameters for DNAN-Based Explosives
摘要
Abstract
To rapidly calibrate the Lee-Tarver three-term ignition and growth model parameters for DNAN-based explosives,a barrier test simulation model was established with HMX as the donor explosive and DNAN/RDX-based aluminized explosive as the receptor charge.The influence of model parameters on the shock initiation response of the explosive was investigated.Based on the response characteristics at the critical barrier thickness for detonation,the 15 parameters of the ignition and growth model were classified into coefficient parameters,exponent parameters,and threshold parameters.Quantitative relationships between each parameter and the explosive reaction rate were obtained through classified adjustment,and parameter sensitivity analysis was completed.The results indicate that the critical barrier thickness for complete detonation of DNAN-based explosives is 7.5-8.0 mm,and the critical barrier thickness for low-velocity detonation is 25.0-25.5 mm.Parameters I,G1,G2,Figmax,and FGRmax exhibit a positive correlation with the explosive reaction rate,while parameters y,e,g,z,a,and FGRmin exhibit a negative correlation with the explosive reaction rate.Parameters G1,y,a,and FGRmax are identified as the key sensitive parameters affect-ing the reaction degree.The findings provide a basis for parameter adjustment in the rapid calibration of the Lee-Tarver three-term ignition and growth model.关键词
DNAN基炸药/冲击起爆/Lee-Tarver点火增长模型/参数敏感性分析Key words
DNAN-based explosives/shock initiation/Lee-Tarver ignition and growth model/Parameter Sensitivity Analysis分类
军事科技引用本文复制引用
杨旭阳,王新颖,陶彦光,王宇辉,陈宇航..基于DNAN基炸药的点火增长模型参数研究[J].含能材料,2026,34(9):1055-1067,13.基金项目
2023年辽宁省教育厅基础科研项目(JYTMS20230206)Basic Scientific Research Project of the Liaoning Provincial Department of Education in 2023(No.JYT-MS20230206) (JYTMS20230206)