模具技术Issue(4):9-15,7.
新能源汽车电机壳体模具成型过程数值模拟与工艺参数优化
Numerical simulation and process parameter optimization of mold forming process for motor housing of new energy vehicles
摘要
Abstract
To address the defects such as shrinkage porosity and deformation in the high-pressure die casting process of motor housings for new energy vehicles,this paper investigates numerical simulation of the forming process and multi-objective optimization of process parameters.Based on the material characteristics of ADC12 aluminum alloy and the thin-walled,multi-rib structural features,a thermal-fluid-solid coupled finite element model is established to analyze the evolution of mold filling flow,solidification shrinkage,and residual stresses.Key process parameters,including pouring temperature,mold temperature,and high-speed injection velocity,are selected through orthogonal experimental design.A surrogate model for defect index and deformation is constructed using response surface methodology,and the NSGA-II algorithm is introduced for multi-objective Pareto optimization to achieve coordinated control of forming quality and dimensional accuracy.The results show that the optimized process reduces the shrinkage porosity volume fraction from 1.95%to 0.71%,decreases the maximum end-face deformation from 0.51 mm to 0.32 mm,and improves the air tightness pass rate from 33%to 100%.Small-batch trial production validates the accuracy of the numerical simulations,with an error of less than 8%.The study demonstrates that the proposed closed-loop method of"simulation-evaluation-optimization"can effectively enhance the forming quality and process stability of motor housings,providing a theoretical basis and technical pathway for the intelligent manufacturing of key components in new energy vehicles.关键词
电机壳体/高压压铸/数值模拟/工艺优化/缩松缺陷Key words
motor housing/high-pressure die casting/numerical simulation/process optimization/shrinkage porosity defect分类
矿业与冶金引用本文复制引用
朱可宁,甘代伟..新能源汽车电机壳体模具成型过程数值模拟与工艺参数优化[J].模具技术,2026,(4):9-15,7.基金项目
陕西国防工业职业技术学院2026年度校本科研计划项目"新能源汽车电机壳体模具成形过程数值模拟与工艺参数优化"(编号:Gfy26-06) (编号:Gfy26-06)
陕西国防工业职业技术学院"金种子"青年教师项目(编号:JFZX2509) (编号:JFZX2509)
2023年度陕西省职业技术教育学会课题"产教融合背景下新能源汽车技术专业群建设的探索与实践"(编号:2023SZX042). (编号:2023SZX042)