| 注册
首页|期刊导航|模具技术|高一致性电池模组结构件模具快速成型与尺寸稳定性分析

高一致性电池模组结构件模具快速成型与尺寸稳定性分析

冯帆 朱可宁

模具技术Issue(4):29-35,7.
✕
模具技术Issue(4):29-35,7.

高一致性电池模组结构件模具快速成型与尺寸稳定性分析

Rapid prototyping and dimensional stability analysis of high-consistency strutural components for battery module molds

冯帆 1朱可宁1

作者信息

  • 1. 陕西国防工业职业技术学院,陕西 西安 710300
  • 折叠

摘要

Abstract

Aiming at the problems of poor consistency,large thermal deformation and long development cycle in the mass production process of power battery module components of new energy vehicles,this paper proposes a rapid prototyping scheme integrating digital modeling and intelligent optimization.Firstly,based on the analysis of rheological properties of materials,the key process sensitive factors such as melt temperature,mold temperature,injection speed and holding time were screened out by orthogonal experimental design.Secondly,the improved genetic algorithm is introduced to realize multi-objective synchronous optimization of injection parameters and internal conformal cooling system layout.To accurately control nonlinear warping,a thermo mechanical coupled residual stress evolution model containing a generalized thermo viscoplastic constitutive equation was constructed,and a residual prediction correction mechanism was established by combining neural networks.An active compensation strategy for cavity size was proposed through a weighted fusion formula.The experimental verification uses an embedded eight channel thermistor array in the mold to monitor the temperature field distribution,combined with a high-precision coordinate measuring instrument to collect physical dimension data of the parts.The results of continuous 30 d production tracking experiments show that after applying the compensation strategy,the process capability index of key dimensions jumped from the initial 0.79 to 1.42,the root mean square error decreased to 0.054 mm,and the comprehensive qualification rate of dimensions exceeded 96.7%.Compared with the traditional empirical mode,the trial period is shortened by about 30%.The scheme is verified by the measured data,which effectively suppresses the forming defects,realizes the reliable control of the dimensional stability of the die in the whole life cycle.

关键词

电池模组/结构件/模具快速成型/尺寸稳定性/改进遗传算法/主动补偿

Key words

battery module/structural component/rapid prototyping/dimensional stability

分类

矿业与冶金

引用本文复制引用

冯帆,朱可宁..高一致性电池模组结构件模具快速成型与尺寸稳定性分析[J].模具技术,2026,(4):29-35,7.

基金项目

2026年度陕西国防工业职业技术学院科研计划项目"高一致性电池模组结构件快速成型与尺寸稳定性分析研究"(编号:Gfy26-09) (编号:Gfy26-09)

2023年度陕西高等职业教育教学改革研究委托项目"中高职贯通一体化人才培养模式创新与实践"(编号:23GW006). (编号:23GW006)

模具技术

1001-4934

访问量0
|
下载量0
段落导航相关论文