| 注册
首页|期刊导航|模具技术|基于改进GA与DDQN的模具加工智能调度及系统设计

基于改进GA与DDQN的模具加工智能调度及系统设计

郑素萍 许严翀 卢明

模具技术Issue(4):36-44,9.
✕
模具技术Issue(4):36-44,9.

基于改进GA与DDQN的模具加工智能调度及系统设计

Intelligent scheduling and system design for mold processing based on improved GA and DDQN

郑素萍 1许严翀 2卢明1

作者信息

  • 1. 巨鑫建设集团有限公司余杭分公司,浙江 杭州 311100
  • 2. 纽约大学,美国 纽约 11101
  • 折叠

摘要

Abstract

To improve the production efficiency and stability of mold processing,an intelligent scheduling and system design for mold processing based on improved genetic algorithm(GA)and double deep Q-network(DDQN)is proposed.Firstly,considering the static invariance condition of the mold processing equipment,with the objective function of minimizing the mold processing cost,the initial population and cross mutation improved GA were used to solve the problem,achieving the optimization of static scheduling for mold processing;Then,considering the dynamic adjustment conditions of the mold processing equipment,with minimizing the mold processing runoff as the objective function,the DDQN was used for solving,achieving dynamic scheduling optimization of mold processing.Finally,a mold processing intelligent scheduling system was constructed based on Visual Studio software and C#language to validate the method.The results show that the total cost of improving the GA for static scheduling of mold processing is 874.6 yuan,with an average relative deviation rate of 0.01%;The average time for dynamic scheduling of mold processing by DDQN is 7.48 s.Based on improved GA and DDQN,an intelligent scheduling system for mold processing can improve production efficiency and stability,and reduce mold processing time.From this,it can be concluded that this method and system have certain practical application value,providing a reference for intelligent scheduling of mold processing.

关键词

模具加工/智能调度/静态调度/动态调度/遗传算法(GA)/双深度Q网络(DDQN)

Key words

mold processing/intelligent scheduling/static scheduling/dynamic scheduling/genetic algorithm(GA)algorithm/double deep Q-network(DDQN)network

分类

信息技术与安全科学

引用本文复制引用

郑素萍,许严翀,卢明..基于改进GA与DDQN的模具加工智能调度及系统设计[J].模具技术,2026,(4):36-44,9.

模具技术

1001-4934

访问量0
|
下载量0
段落导航相关论文