| 注册
首页|期刊导航|模具技术|面向轮胎花纹块模具制造的CAD-3D打印一体化工艺与验证

面向轮胎花纹块模具制造的CAD-3D打印一体化工艺与验证

陈琳

模具技术Issue(4):45-52,8.
✕
模具技术Issue(4):45-52,8.

面向轮胎花纹块模具制造的CAD-3D打印一体化工艺与验证

Integrated CAD–3D printing manufacturing process and engineering verification for tire pattern block molds

陈琳1

作者信息

  • 1. 恩施职业技术学院 信息工程学院,湖北 恩施 445000
  • 折叠

摘要

Abstract

Mold casting as an important process for achieving high-precision and large-scale parts manufacturing,has been widely applied in fields such as automobiles,aerospace,and mechanical manufacturing.However,traditional sand casting and investment casting have problems such as long production cycles,insufficient precision,and poor quality stability in the precise forming of complex structures.Therefore,the research focuses on the mold manufacturing of tire tread blocks,proposes and constructs an integrated CAD-3D printing process,and realizes high-precision rapid casting through digital modeling and additive manufacturing technology.By comparing this process with the traditional method,it was found that in the design of complex pattern structures,the design accuracy rate of this process reached 98.3%,and the dimensional accuracy rate was 93.8%,which was significantly better than the comparison process.Meanwhile,the heat dissipation capacity of the prepared mold meets the A-level certification standard,and its size and hardness both comply with the engineering specification requirements.The verification results show that this integrated process can effectively enhance the precision,efficiency and performance of tire tread block mold manufacturing,providing a feasible path for the digital and intelligent transformation of mold manufacturing.

关键词

CAD/3D 打印/砂型铸造/花纹块模具/熔模铸造

Key words

CAD/3D printing/sand casting/pattern block mold/investment casting

分类

矿业与冶金

引用本文复制引用

陈琳..面向轮胎花纹块模具制造的CAD-3D打印一体化工艺与验证[J].模具技术,2026,(4):45-52,8.

基金项目

2024湖北省职业技术教育学会教育科研课题"高等职业教育数字化赋能高质量发展研究"(编号:2024ZJGB087). (编号:2024ZJGB087)

模具技术

1001-4934

访问量0
|
下载量0
段落导航相关论文