电焊机2026,Vol.56Issue(10):1-8,8.DOI:10.7512/j.issn.1001-2303.2026.10.01
Ag-Cu-xTi@Sc2W3O12颗粒增强钎料在SiC表面的润湿行为及界面反应机理
Wetting Behavior and Interfacial Reaction Mechanism of Ag-Cu-xTi@Sc2W3O12 Particle-reinforced Filler Metal on SiC Surface
摘要
Abstract
This study addresses the residual stress issue in ceramic/metal heterogeneous joints caused by thermal expansion coefficient(CTE)mismatch by incorporating negative thermal expansion(NTE)material Sc2W3O12 particles into the Ag-Cu-xTi filler metal system.The mechanisms of Sc2W3O12 on the wetting behavior and interfacial reactions of the filler metal on SiC substrates were systematically investigated.Sc2W3O12 particles were synthesized via solid-phase sintering and uniformly dispersed(6 wt.%)into Ag-Cu-xTi(x=2-10 wt.%)filler metals.The sessile drop method was employed to characterize the contact angle,spreading kinetics,and precursor film evolution.Results demonstrate that an optimal Ti content(6 wt.%)sig-nificantly enhances wettability,reducing the contact angle from 42°(10 wt.%Ti)to 28°,attributed to the in-situ formation of TiC/Ti5Si3 reaction layers at the SiC interface and the synergistic regulation of melt viscosity by Sc2W3O12.However,exces-sive Ti(>6 wt.%)degrades wettability due to increased viscosity and hindered Ti diffusion caused by Sc2W3O12 particles.Mi-crostructural analysis reveals that Sc2W3O12 modulates Ti diffusion kinetics,influencing the distribution and continuity of in-terfacial reaction products,which critically determines joint reliability.This work provides theoretical guidance for design-ing NTE particle-reinforced filler metals and their applications in ceramic/metal bonding.关键词
Sc2W3O12颗粒/Ag-Cu-Ti钎料/润湿行为/界面反应/残余应力调控Key words
Sc2W3O12 particles/Ag-Cu-Ti filler metal/wetting behavior/interfacial reactions/residual stress mitigation分类
矿业与冶金引用本文复制引用
张国庆,俞伟元,强潇,王明康..Ag-Cu-xTi@Sc2W3O12颗粒增强钎料在SiC表面的润湿行为及界面反应机理[J].电焊机,2026,56(10):1-8,8.基金项目
国家自然科学基金(5226010024) (5226010024)