电焊机2026,Vol.56Issue(10):9-18,41,11.DOI:10.7512/j.issn.1001-2303.2026.10.02
钛合金耐压壳焊缝缺陷处的氢扩散仿真研究
Simulation Study on Hydrogen Diffusion at Weld Defects of Titanium Alloy Pressure Shells
摘要
Abstract
To explain the problem of hydrogen induced delayed cracking at the weld seam of titanium alloy pressure spheri-cal shell,based on the diffusion theory of hydrogen in metals and the plane hydrogen pressure theory,a hydrogen diffusion calculation model with internal defects in the weld seam of titanium alloy pressure spherical shell is established,and numeri-cal simulation research on hydrogen diffusion and aggregation at the weld seam defects is carried out.The parameters of hy-drogen diffusion coefficient and solubility of titanium alloy are obtained through hydrogen permeation test and weld phase composition model;a finite element model with different shapes of pores inside the weld seam has been established,the coupled calculation of stress field and hydrogen diffusion at the defect has been carried out,compare and analyze the influ-ence of load form and pore type on hydrogen diffusion and aggregation.The research results indicate,under constant loads,hydrogen concentration accumulates in the area with high geometric gradients and towards the area of compressive stress around the weld pores;under alternating loads,the shape of pores(geometric gradients)affects the hydrogen distribution,and hydrogen concentration significantly increase in the area with large geometric gradients,which can easily induce hydro-gen induced cracks to propagate along the area with large geometric gradients.The study reveals that the coupling effect of defect geometric gradient and stress gradient is the key factor controlling the degree of hydrogen accumulation,which can provide a basis for the safety assessment of weld defects in titanium alloy pressure shells.关键词
钛合金/耐压球壳/焊缝内部气孔/焊缝组织成分/氢扩散Key words
titanium alloy/pressure spherical shell/internal porosity of weld seam/composition of weld seam/hydrogen dif-fusion分类
交通工程引用本文复制引用
郦羽,伍朝晖,魏波,吴小红..钛合金耐压壳焊缝缺陷处的氢扩散仿真研究[J].电焊机,2026,56(10):9-18,41,11.基金项目
上海市2024年度"科技创新行动计划"启明星项目(扬帆专项)(24YF2710800) (扬帆专项)