| 注册
首页|期刊导航|电焊机|激光加载模式对Inconel 625焊接接头组织和性能的影响

激光加载模式对Inconel 625焊接接头组织和性能的影响

侯童 石玗 许有伟 朱明 张刚 张文著 李春华

电焊机2026,Vol.56Issue(10):31-41,11.
✕
电焊机2026,Vol.56Issue(10):31-41,11.DOI:10.7512/j.issn.1001-2303.2026.10.04

激光加载模式对Inconel 625焊接接头组织和性能的影响

Effect of Laser Application mode on the Organization and Properties of Inconel 625 Welded Joints

侯童 1石玗 1许有伟 2朱明 1张刚 1张文著 1李春华3

作者信息

  • 1. 兰州理工大学 省部共建有色金属先进加工与再利用国家重点实验室,甘肃 兰州 730050
  • 2. 兰州理工大学 省部共建有色金属先进加工与再利用国家重点实验室,甘肃 兰州 730050||东莞宜安科技股份有限公司,广东 东莞 523000
  • 3. 东莞宜安科技股份有限公司,广东 东莞 523000
  • 折叠

摘要

Abstract

To investigate the influence of laser loading modes on the microstructure and mechanical properties of Inconel 625 welded joints,autogenous butt welding of 1 mm-thick Inconel 625 sheets was conducted using three loading modes:conventional Gaussian laser mode(GHS-LW),constant-power galvanometer scanning mode(CPM-LW),and full-domain power modulated galvanometer mode(FDPM-LW).The weld macro-morphology,microstructural characteristics,secondary phase distribution,and mechanical properties under the three modes were comparatively analyzed using SEM,EDS,and EBSD.The results indicate that the circular oscillation of the laser beam in galvanometer modes induces a stirring effect on the molten pool,reducing the temperature gradient during solidification and promoting dendrite fragmentation,which signifi-cantly increases the proportion of equiaxed grains in the weld center and reduces the precipitation of Laves phases with finer and more dispersed distribution.Compared with GHS-LW,the tensile strength of CPM-LW and FDPM-LW joints increases by 9.9%and 8.7%,respectively,and the elongation increases by 25.2%and 32.6%,respectively,with notable improvements in weld center microhardness.The FDPM-LW mode achieves superior equiaxed grain refinement through gradient power in-put that generates more intense molten pool stirring.Modifying the molten pool dynamics via beam oscillation serves as an effective approach for grain refinement,Laves phase suppression,and consequent enhancement of the comprehensive me-chanical properties of Inconel 625 welded joints.

关键词

激光焊/Inconel 625/振镜扫描/微观组织/力学性能

Key words

laser welding/Inconel 625/galvanometer scanning/microstructure/mechanical properties

分类

矿业与冶金

引用本文复制引用

侯童,石玗,许有伟,朱明,张刚,张文著,李春华..激光加载模式对Inconel 625焊接接头组织和性能的影响[J].电焊机,2026,56(10):31-41,11.

基金项目

国家自然科学基金面上项目(52075235) (52075235)

嘉峪关市科技计划项目(22-16) (22-16)

甘肃省优秀博士生项目(22JRRA793) (22JRRA793)

电焊机

1001-2303

访问量0
|
下载量0
段落导航相关论文