电焊机2026,Vol.56Issue(10):58-63,82,7.DOI:10.7512/j.issn.1001-2303.2026.10.07
磁吸双枪爬行机器人焊接性能及波折钢板-H型钢梁桥工程适用性研究
Welding Performance and Engineering Applicability of Magnetic Dual-Gun Crawling Robot for Corrugated Steel Plate–H-Shaped Steel Beam Bridges
李天鹏 1王陈宾 1曾延平 1郑嘉辉 2孟云飞 2陈辉2
作者信息
- 1. 四川路桥华东建设有限责任公司,四川 成都 610202
- 2. 西南交通大学 材料科学与工程学院,四川 成都 610031
- 折叠
摘要
Abstract
To address the issues of narrow welding space,poor torch accessibility,and low manual welding efficiency in the lap fillet welding of corrugated steel plates and H-beam main girders in the new type of dense-beam steel composite struc-ture bridges,a magnetic-adhesion dual-gun crawling welding robot system has been independently developed.To evaluate the welding performance and engineering applicability of this system,systematic field tests and application studies were car-ried out.Process tests were conducted by setting different welding speeds(20-80 cm/min),and magnetic particle inspection was used to assess weld quality.Engineering applicability was analyzed from two perspectives:welding efficiency and eco-nomic viability.The results show that the robot achieves a welding qualification rate of 97.3%-98.6%,which is close to that of manual welding(99.1%),with good weld surface formation and no obvious cracks,porosity,or other defects,indicating stable and reliable welding quality.At a welding speed of 80 cm/min,the comprehensive efficiency of dual-sided synchro-nous welding is approximately three times that of manual welding,significantly reducing on-site operation time.Economic comparison analysis shows that the system outperforms manual welding in terms of welding wire consumption,gas con-sumption,and labor input.Although the repair cost increases slightly,the overall cost per unit length of weld is reduced by more than 20%.The magnetic-adhesion dual-gun crawling welding robot system demonstrates stable welding performance and good engineering applicability,effectively solving the challenges of high-quality and high-efficiency welding of fillet welds in confined spaces.It holds great potential for promotion and application and can serve as a technical reference for welding construction of similar steel structure bridges.关键词
磁吸双枪爬行机器人/焊接性能/工程适用性/波折钢板/H型钢梁/搭接角焊缝Key words
magnetic-adhesion dual gun crawling welding robot/welding performance/engineering applicability/corru-gated steel plate/H-shaped steel beam/lap fillet weld分类
矿业与冶金引用本文复制引用
李天鹏,王陈宾,曾延平,郑嘉辉,孟云飞,陈辉..磁吸双枪爬行机器人焊接性能及波折钢板-H型钢梁桥工程适用性研究[J].电焊机,2026,56(10):58-63,82,7.