电焊机2026,Vol.56Issue(10):118-124,7.DOI:10.7512/j.issn.1001-2303.2026.10.15
焊接方法对L245N管道环焊接头组织与性能的影响研究
Microstructure and Properties of L245N Pipeline Ring Welds Using Different Welding Methods
摘要
Abstract
The welding process of oil and gas gathering and transportation pipelines affects the quality,efficiency,cost,and flow safety.There are some challenges in pipeline welding,such as low automation in,high defect rates in welds,and low ef-ficiency.Hence,the manual welding,combined welding,automatic TIG welding,and automatic TIG+MAG welding experi-ments were performed to weld L245N pipes with dimensions of ⌀114 mm×5mm.The formation of welds,microstructure,and mechanical properties of the joints were investigated.Results indicate that manual and combined welding exhibit signifi-cant fluctuations in weld shape and dimensions,while automatic welding produces continuous welds with uniform shape and dimensional consistency.All welding processes formed strong metallurgical bonding between the weld and base metal.Auto-matic welding resulted in a narrower heat-affected zone(HAZ),with dense ferrite structures in both the HAZ and weld zone,along with abundant and fine bainite.L245N ring weld joints from all processes demonstrated good strength,impact tough-ness,and bending performance,with higher impact toughness observed in automatic TIG and automatic TIG+MAG welds.The developed automatic TIG and automatic TIG+MAG processes are suitable for automated welding of L245N pipelines.The outcomes provide experimental and data support for the automated welding of small-diameter gathering and transporta-tion pipelines.关键词
L245N/管道/焊接/微观组织/力学性能Key words
L245N/pipeline/welding/microstructure/mechanical properties分类
矿业与冶金引用本文复制引用
周长庆,张利华,王笛,刘涛,郭龙龙..焊接方法对L245N管道环焊接头组织与性能的影响研究[J].电焊机,2026,56(10):118-124,7.基金项目
陕西省自然科学基础研究计划(2025JC-YBMS-545) (2025JC-YBMS-545)
石油天然气装备教育部重点实验室开放基金(OGE202302-11) (OGE202302-11)