计量学报2026,Vol.47Issue(9):1258-1266,9.DOI:10.3969/j.issn.1000-1158.2026.09.02
基于同步触发测量的GNSS接收机动态定位精度校准方法研究
Research on the Calibration Method for Dynamic Positioning Accuracy of GNSS Receivers Based on Synchronous Triggered Measurements
摘要
Abstract
To calibrate and evaluate the dynamic positioning accuracy of Global Navigation Satellite System(GNSS)receivers,a calibration method using synchronized trigger measurement is proposed.This method achieves hardware-level time synchronization for data acquisition during dynamic calibration.The composition of the calibration device is introduced,and the stability of the turntable is tested to ensure its reliability and traceability as a standard device for GNSS receiver dynamic testing.The design and implementation of the calibration device,along with the calibration principle,are described:the GNSS antenna is fixed at the end of the rotary arm,generating a standard dynamic trajectory through circular motion.Combined with synchronized trigger measurement,accurate dynamic positioning errors are obtained.Based on this,dynamic calibration experiments are conducted.Results show that when the linear velocity of the turntable ranges from 0.42 m/s to 2.93 m/s,the maximum dynamic horizontal positioning deviation is 0.088 m,and the maximum dynamic vertical positioning deviation is 0.039 m.The experiments demonstrate that using circular motion and synchronized trigger measurement for evaluating dynamic positioning accuracy enables millisecond-level time synchronization in data acquisition,effectively avoiding errors caused by asynchronous data collection.Furthermore,Bayesian inference is used to analyze the velocity-dependent uncertainty introduced by antenna motion.The rationality of the uncertainty evaluation is verified through experiments.In summary,the proposed method is suitable for calibrating the dynamic positioning accuracy of GNSS receivers.关键词
几何量计量/GNSS接收机/同步触发测量/转台/动态校准/贝叶斯推论/不确定度Key words
geometric measurement/GNSS receivers/synchronous triggering measurement/turntable/dynamic calibration/Bayesian inference/uncertainty分类
通用工业技术引用本文复制引用
蒋鑫,李连福,占春连,王德利,缪东晶,李建双..基于同步触发测量的GNSS接收机动态定位精度校准方法研究[J].计量学报,2026,47(9):1258-1266,9.基金项目
国家重点研发计划(2023YFF0612701,2023YFF0615803) (2023YFF0612701,2023YFF0615803)
中国计量科学研究院基本科研业务费探索性创新项目(AKYCX2511) (AKYCX2511)
国家市场监督管理总局科技计划项目(2024MK195) (2024MK195)