计量学报2026,Vol.47Issue(9):1300-1309,10.DOI:10.3969/j.issn.1000-1158.2026.09.08
基于测流信号自适应辨识的声波应答法ADCP校准技术研究
Research on Acoustic Wave Response-Based ADCP Calibration Using Adaptive Velocity Signal Identification
摘要
Abstract
To improve the calibration reliability of acoustic Doppler current profiler(ADCP)using the acoustic response method under complex transmission signal conditions,an adaptive velocity signal identification-based calibration approach is proposed.During acoustic response calibration,the transmitted signals of ADCP often exhibit complex structures,and effective velocity measurement signal segments are difficult to distinguish.Signal aliasing under stratified flow conditions may further affect calibration accuracy.A multi-beam ADCP calibration system was established.Multi-dimensional signal features were analyzed to preliminarily extract candidate signal intervals,followed by refined screening based on velocity signal criteria.Adaptive identification and extraction of valid velocity signal segments were thereby achieved.Based on the identified signal segments,simulated echo signals corresponding to preset flow velocities were generated to perform flow velocity calibration of ADCP.Calibration and comparison experiments were conducted using multiple ADCP prototypes of different models.Experimental results show that within a velocity range of 0.01 to 6 m/s,the maximum expanded uncertainty(k=2)was 5.66 mm/s.The results demonstrate that the proposed method provides stable and applicable calibration performance under different operating conditions.关键词
流量计量/声学多普勒流速剖面仪/声波应答法/信号特征识别/校准/测量不确定度Key words
flow measurement/ADCP/acoustic wave response method/signal feature recognition/calibration/uncertainty evaluation分类
通用工业技术引用本文复制引用
赵薇,王敏,何龙标,王文侠,邢广振,王珂,王月兵..基于测流信号自适应辨识的声波应答法ADCP校准技术研究[J].计量学报,2026,47(9):1300-1309,10.基金项目
国家自然科学基金(51805506) (51805506)
中国计量科学研究院基本科研业务费(AKYTC1601,AKYZD2112-2) (AKYTC1601,AKYZD2112-2)