| 注册
首页|期刊导航|含能材料|基于CDEM的惰性造型粉压制成型颗粒级配效应研究

基于CDEM的惰性造型粉压制成型颗粒级配效应研究

李志鸿 李凤晨 胡桓宁 冯春 苏馨雨 冯吉利 魏延鹏 魏炳忱

含能材料2026,Vol.34Issue(10):1148-1159,12.
✕
含能材料2026,Vol.34Issue(10):1148-1159,12.DOI:10.11943/CJEM2026177

基于CDEM的惰性造型粉压制成型颗粒级配效应研究

Study on Particle Gradation Effect in Compaction Molding of Inert Molding Powder Based on Continuum-discontinuum Element Method

李志鸿 1李凤晨 2胡桓宁 2冯春 2苏馨雨 1冯吉利 3魏延鹏 2魏炳忱2

作者信息

  • 1. 中国科学院力学研究所,北京 100190||中国矿业大学(北京)力学与土木工程学院,北京 100083
  • 2. 中国科学院力学研究所,北京 100190
  • 3. 中国矿业大学(北京)力学与土木工程学院,北京 100083
  • 折叠

摘要

Abstract

To reveal the regulation mechanism of particle gradation on the densification of Polymer-Bonded Explosives(PBX)powder during mould compaction,a three-dimensional deformable discrete element model based on the Continuum-Discontinuum Element Method(CDEM)was established to carry out mesoscopic numerical simulations of the whole confined compression process of multi-sized inert molding powder(potassium chloride simulant).Single simulant particles are meshed with tetrahedral elements,and the Shima-Oyane plastic hardening constitutive model was adopted to characterize the compressive behavior of particles.Five groups of gradation specimens with identical solid content were generated,including Fuller,Andreasen-Andersen,Dinger-Funk,Rosin-Rammler and fractal gradations.Model parameters were calibrated against lab-oratory tests to guarantee numerical accuracy.The simulation results indicate that the compaction process of particle assemblies can be divided into three stages:particle rearrangement,plastic compression and densification hardening.With a well-matched ratio of coarse to fine particles,Fuller gradation delivers higher pore filling efficiency under the same pressure,presenting the highest overall relative density after compaction and more uniform spatial distributions of equivalent plastic strain and density than the other four gradations.In contrast,Dinger-Funk,Rosin-Rammler and fractal gradations feature abundant coarse particles that tend to form stable force-transmitting skeletons,endowing the assemblies with stronger compression resistance,yet they retain more residual pores and present obvious deformation localization.Within the constrained particle size range of 0.25-0.90 mm,the Fuller gradation balances pore filling and overall compaction performance,making it the optimal particle size distribution for the mould compaction of such energetic powders.This study can provide mesomechanical references for the formulation design of molding powder and the optimization of compaction processes.

关键词

连续-非连续单元法(CDEM)/可变形离散元/含能材料压制成型/颗粒级配/粉体致密化

Key words

Continuum-Discontinuum Element Method(CDEM)/deformable discrete element method/compaction molding of energetic materials/particle gradation/powder densification

分类

军事科技

引用本文复制引用

李志鸿,李凤晨,胡桓宁,冯春,苏馨雨,冯吉利,魏延鹏,魏炳忱..基于CDEM的惰性造型粉压制成型颗粒级配效应研究[J].含能材料,2026,34(10):1148-1159,12.

含能材料

1006-9941

访问量0
|
下载量0
段落导航相关论文