含能材料2026,Vol.34Issue(10):1173-1183,11.DOI:10.11943/CJEM2026136
固体推进剂装药保温特性分析与计算
Analysis and Calculation on Thermal Holding Characteristics of Solid Propellant Charge
魏滨邦 1伍俊英 2冯自瑞 3高喜飞 3周凯鹏3
作者信息
- 1. 西安北方惠安化学工业有限公司,陕西 西安 710302||北京理工大学材料学院,北京 100081
- 2. 北京理工大学机电学院,北京 100081
- 3. 西安北方惠安化学工业有限公司,陕西 西安 710302
- 折叠
摘要
Abstract
To address the engineering difficulty of inaccurate prediction of thermal holding time for large-size solid propellant charges,high and low temperature thermal holding tests and numerical simulations are carried out on a four-component HTPB propellant charge specimen.Temperature sensors are arranged inside the charge to collect time-series internal temperature data in real time,and the temperature variation rules throughout the whole thermal holding process are systematically revealed.A two-dimensional axisymmetric finite element model is established and validated by experimental data.The results show that the heat transfer process of the charge during thermal holding can be divided into three stages:temperature response stage,radial un-steady heat transfer stage and thermal equilibrium stage.In the radial unsteady heat transfer stage,the internal temperature of the charge follows a natural exponential law with time,while the shell surface temperature varies in accordance with the double nat-ural exponential rule.In the thermal equilibrium stage,the temperature distribution presents a natural logarithmic function rela-tionship with the radial relative position.Calculation verification indicates that the overall numerical error is less than 10%,with deviations of 5.5%and 9.9%under high-temperature and low-temperature working conditions respectively,which meets the en-gineering accuracy requirements.Revising the first-type boundary condition with the time-series fitting function of shell surface temperature can effectively compensate for errors caused by numerical model simplification and improve the calculation accura-cy of heat transfer inside the propellant charge.关键词
固体推进剂装药/HTPB推进剂/保温试验/数值模拟/温度分布Key words
solid propellant charge/HTPB propellant/thermal holding test/numerical simulation/temperature distribution分类
军事科技引用本文复制引用
魏滨邦,伍俊英,冯自瑞,高喜飞,周凯鹏..固体推进剂装药保温特性分析与计算[J].含能材料,2026,34(10):1173-1183,11.