| 注册
首页|期刊导航|华中师范大学学报(自然科学版)|半自磨机筒体提升条高度与充填率对介质运动特性的影响关系

半自磨机筒体提升条高度与充填率对介质运动特性的影响关系

刘海婵 周强 赵环帅 郭庆 孙晶 常秋香 赵国锋 宫三朋

华中师范大学学报(自然科学版)2026,Vol.60Issue(5):805-816,12.
✕
华中师范大学学报(自然科学版)2026,Vol.60Issue(5):805-816,12.DOI:10.19603/j.cnki.1000-1190.2026.05.009

半自磨机筒体提升条高度与充填率对介质运动特性的影响关系

Effects of lifter height and filling rate on medium movement in a semi-autogenous mill

刘海婵 1周强 2赵环帅 3郭庆 1孙晶 1常秋香 1赵国锋 4宫三朋4

作者信息

  • 1. 宁波大学科学技术学院机械工程与自动化学院,浙江 宁波 315300
  • 2. 宁波大学科学技术学院机械工程与自动化学院,浙江 宁波 315300||矿冶过程智能优化制造全国重点实验室,北京 102628||矿冶过程自动控制技术北京重点实验室,北京 102628||河南理工大学机械与动力工程学院,河南 焦作 454003
  • 3. 河北省智能装备数字化设计及过程仿真重点实验室,河北 唐山 063000
  • 4. 河南理工大学机械与动力工程学院,河南 焦作 454003
  • 折叠

摘要

Abstract

The coordination and optimization of the liner structure and the medium filling rate of semi-autogenous mill play a key role in improving the grinding efficiency.By modeling an industrial semi-autogenous mill(SAG)with a diameter of 8.4 m,the discrete element method(DEM)numerical simulation study under different lift bar heights and comprehensive filling rates was carried out,and the motion characteristics and energy transfer behavior of material particles in the cylinder were systematically analyzed.According to the particle trajectory,the typical structural areas such as head,shoulder,volumetric toe and impact toe are clearly divided,and the response law of each area with the height and filling rate of the lifter is revealed.The results showed that the height of the lifter mainly affected the particle head and impact toe,and the filling rate mainly affected the shoulder position,and neither had a significant effect on the volumetric toe.Based on the regression response surface analysis,the filling rate and the lifter height showed a significant nonlinear coupling effect on the effective collision cumulative power,and the effective collision cumulative power reached an optimal level under the conditions of about 30%-32%filling rate and lifter height of 160-180 mm.The overall mill power exhibited a slow downward trend with the increase of lifter height,but increased linearly with the increase of filling rate.These results provide theoretical support and practical basis for the structural design optimization,operation parameter adjustment and online condition monitoring of semi-autogenous mills.

关键词

半自磨机/离散元法/衬板/充填率/协同优化

Key words

SAG mill/discrete element method/liner/filling rate/collaborative optimization

分类

数理科学

引用本文复制引用

刘海婵,周强,赵环帅,郭庆,孙晶,常秋香,赵国锋,宫三朋..半自磨机筒体提升条高度与充填率对介质运动特性的影响关系[J].华中师范大学学报(自然科学版),2026,60(5):805-816,12.

基金项目

国家自然科学基金项目(52304290) (52304290)

浙江省自然科学基金项目(ZCLMS25E0401) (ZCLMS25E0401)

矿冶过程智能优化制造全国重点实验室开放研究基金项目(BGRIMM-KZSKL-2022-01) (BGRIMM-KZSKL-2022-01)

河北省教育厅科学研究项目(ZC2026264) (ZC2026264)

唐山学院博士创新项目(XJ2025002102). (XJ2025002102)

华中师范大学学报(自然科学版)

1000-1190

访问量0
|
下载量0
段落导航相关论文